This is an old revision of the document!


A PCRE internal error occured. This might be caused by a faulty plugin

===== Troubleshooting FAQ ===== ==== "No IP address" ==== **Problem:**\\ You have setup a DHCP server, boot EtherBoot, but it will fail to accept an IP address from the server. **Solution:**\\ As of version 3.0.3 of the ISC DHCP server, the value of ''"next-server"'' does not have a reasonable default any more (it used to contain the IP address of the DHCP server, which would act as TFTP server then). You will have to set it to the IP address of the TFTP server (in most cases, the same machine as the DHCP server): <file>next-server 192.168.0.1;</file> in your ''dhcpd.conf'', somewhere in the global section near the top, will do the trick.


Navigation

* [[:start|Home]] * [[:about|About our Project]] * [[:download|Download]] * [[:screenshots|Screenshots]] * Documentation * [[:howtos|HowTo Guides]] * [[:appnotes|Application Notes]] * [[:faq:|FAQs]] * [[:doc|General Doc]] * [[:talks|Videos, Talks, and Papers]] * [[:hardwareissues|Hardware Issues]] * [[:mailinglists|Mailing lists]] * [[http://support.etherboot.org/|Bugtracker]] * [[:contributing|Contributing]] * [[:editing_permission|Wiki Edit Permission]] * [[:wiki:syntax|Wiki Syntax]] * [[:contact|Contact]] * [[:relatedlinks|Related Links]] * [[:commerciallinks|Commercial Links]] * [[:acknowledgements|Acknowledgements]] * [[:logos|Logo Art]]

QR Code
QR Code troubleshooting (generated for current page)