This is an old revision of the document!
====== Pxeknife integretion with rom-o-matic ====== ===== Plan ===== provide pxe images/rom/nic with gpxe script embedded. This script will connect to pxeknife server to get boot loader. ===== Implementation ===== Actual working implementation is described [[PxeKnifeRomOMaticHTTP|here]] In file rom-o-matic/build.php the image is compiled by following command <code> make -C '$dir' '$target' </code> I have modified it to compile with embedded image by modifying above code with <code> make -C '$dir' EMBEDDED_IMAGE=./pxeDHCP.gpxe,./pxeSTATIC.gpxe '$target' </code> the script //./pxeDHCP.gpxe// contains following code <code> #!gpxe echo "Hi, We will be using PXEKnife from URL http://www.alien.doesntexist.org/pxeknife" echo "It is assumed that you have dhcp networking" imgload pxeSTATIC.gpxe imgstat ifopen net0 echo "Hit Control+C to cancel DHCP" echo "You may want to do this if you want to use static-IP" echo "Otherwise, it will try DHCP, and then anyway go to static-IP" sleep 4 dhcp net0 set 209:string pxelinux.cfg/default set 210:string http://www.alien.doesntexist.org/pxeknife/ echo "Here we go" chain http://www.alien.doesntexist.org/pxeknife/pxelinux.0 echo "PxeKnife booting cancelled, using local disk instead.." </code> and //./pxeSTATIC.gpxe// contains following script. <code> #!gpxe echo "As you dont have DHCP, you need to give details about network configuration" echo "Soon, you will be presented with interface to provide details about network configuration" echo "Please provide, IP address, Netmask, Gateway and Router" ifopen net0 set net0/ip 10.0.2.15 set net0/netmask 255.255.255.0 set net0/gateway 10.0.2.2 set net0/dns 10.0.2.3 sleep 3 config set 209:string pxelinux.cfg/default set 210:string http://www.alien.doesntexist.org/pxeknife/ echo "Here we go" chain http://www.alien.doesntexist.org/pxeknife/pxelinux.0 echo "PxeKnife booting cancelled, using local disk instead.." </code> The code is hosted at url [[http://www.alien.doesntexist.org/pxeknife/PHP/gpxe_generation/]] ===== Problems (solved) ===== When I boot using qemu with following command <code> qemu -fda gpxe-git-e1000.dsk </code> I get following error <code> no such interface: net0 </code> and booting fails :-(. I also tried with gpxe-git-3c509-eisa.dsk but same result.\\ But when I compile the the gpxe with same script and no target, it works fine <code> make EMBEDDED_IMAGE=./pxeDHCP.gpxe qemu -fda bin/gpxe.dsk </code> ==== Solution ==== Problem was that, qemu does not support all network drivers, and you need to tell qemu which device driver to emulate. Following qemu command is working for rtl8139 ===== For static IP ===== To support static IP, the plan is to have two scripts, one with DHCP and one with Static. When DHCP fails, static will pick up and continue execution. ==== Problem (solved) ==== Second script is not getting executed. I had to load the second script from first script using imgload <code> imgload pxeSTATIC.gpxe </code> Other than that, I had to comment out the break statement in //core/main.c// inside function //main()// there is a loop which iterate over each image. but there was a break, which had to be removed. <code> if ( have_images() ) { for_each_image ( image ) { image_exec ( image ); /* break; */ /* commented so that second script will be executed -- pravin */ } } else { </code> Other change is done in //image/script.c// file inside function //script_exec()// where at end, it re-registers the script. The second executable does not get executed when this line is there, so, I commented it out. I am not sure what exactly is the problem, but my guess is that, \\ re_register puts the script on top of the list, but older mapping where second script was loaded in memory gets messed up somehow. <code> rc = 0; done: /* Re-register image and return */ register_image ( image ); /* commented so that next one will be executed -- pravin */ return rc; } </code>
