This is an old revision of the document!
==== Week 2 ==== === Mon Jun 2 === Git commit: [[http://git.etherboot.org/?p=people/stefanha/gpxe.git;a=commit;h=0004992b5bb35b4d5df324d8afffae04e3ee8285|0004992b5bb35b4d5df324d8afffae04e3ee8285]] **I hit an interesting bug while writing the GDB stub test suite**. The interrupt handler shares the stack with the main thread of control. If the main thread uses stack memory below the stack pointer when an interrupt comes in, then that memory may be corrupted. The interrupt handler uses the stack to store the CPU state and assumes that memory below the stack pointer is unused. One option is a seperate stack for the interrupt handler and GDB stub. This stack doesn't need to be very big (definitely less than 4K, probably 512 bytes is fine). Another option is to subtract an arbitrary amount to "bump" the stack pointer in the interrupt handler. This is a hack and would not guarantee anything. Finally, I am going to leave this issue for now because I think there is very little code (if any) which behaves as described. GCC tends to reserve space for locals variables at the beginning of a function. **Committed a test suite for the GDB stub**. It works in two parts: a GDB script that executes tests and some assembly to set things up on gPXE's end. The two parts pass control through each other using the GDB ''continue'' command and the x86 ''int $3'' breakpoint. The tests include register and memory read/write. I plan to add more as needed by the feature set. To run the test suite, build gPXE with ''GDBSTUB'' and make sure ''tests/gdbstub_test.S'' gets linked in. Then run: <code> $ make bin/gpxe.hd.tmp $ make $ qemu -serial tcp::4444,server bin/gpxe.usb [From another terminal] $ gdb -x tests/gdbstub_test.gdb </code> === Tue Jun 3 === Git commits: [[http://git.etherboot.org/?p=people/stefanha/gpxe.git;a=commit;h=813fd7500972968b19f17326c5cac308c43b59b6|813fd7500972968b19f17326c5cac308c43b59b6]], [[http://git.etherboot.org/?p=people/stefanha/gpxe.git;a=commit;h=6b0bc333ef9123a2f255db49f1346a3cb2d28285|6b0bc333ef9123a2f255db49f1346a3cb2d28285]] **''librm.S'' ''#ifdef'' removal**. The ''GDBSTUB'' ''config.h'' option was implemented using ''#ifdef''. Today I got some advice from mcb30 and removed the ''#ifdefs''. The GDB stub interrupt handlers are now linked in using weak symbols. That means certain symbols are overridden when ''GDBSTUB'' is enabled, causing GDB IDT setup code to be called. **Split serial console from serial driver**. This patch makes the serial driver interface available in ''include/gpxe/serial.h''. It moves the serial console code from ''core/serial.c'' to ''core/serial_console.c'', leaving just the serial driver itself. There is currently no check against ''GDBSTUB'' and ''CONSOLE_SERIAL'' being enabled at the same time. Just don't do it :-). === Wed Jun 4 === Git commit: [[http://git.etherboot.org/?p=people/stefanha/gpxe.git;a=commit;h=b739cae42af8a7b37def48c9284381e98a91043e|b739cae42af8a7b37def48c9284381e98a91043e]], [[http://git.etherboot.org/?p=people/stefanha/gpxe.git;a=commit;h=20a525f3df08af982989663d4c3718af3e985d9b|20a525f3df08af982989663d4c3718af3e985d9b]] **Removed unused ''arch/i386/core/gdbsym.c''**. This was an attempt at GDB debugging via QEMU and mcb30 suggested it could be removed. Its ''GDBSYM'' ''config.h'' option has potential to confuse users wanting to build the GDB stub, so I removed it. **I feel the code is ready for mainline review**. The GDB remote debugging functionality is enabled with ''#define GDBSTUB'' in ''config.h''. Debugging works over the serial port. Here's how I test in QEMU: <code> $ make # with GDBSTUB enabled in config.h $ make bin/gpxe.hd.tmp # for debugging symbols $ qemu -serial tcp::4444,server bin/gpxe.usb [From another terminal] $ gdb (gdb) file bin/gpxe.hd.tmp (gdb) target remote localhost:4444 </code> To run the test suite, add ''REQUIRE_OBJECT ( gdbstub_test )'' in ''core/config.c'' and rebuild. The gdb invocation works like this: <code> $ gdb tests/gdbstub_test.gdb </code> Once all tests are done, you will be left at the GDB prompt and can type ''quit''. Next steps: * Send rom-o-matic patch to mdc so that ''GDBSTUB'' can be chosen when configuring a ROM. * Design a GDB protocol transport interface that serial and UDP can implement. Discuss with mentors. * Handle disconnect properly - ignore breakpoints when GDB is not attached. * Implement hardware breakpoint and watchpoint support using debug registers. * Using debug register, implement NULL pointer bug guard. * Memory read/write support for device memory. Check kgdb implementation for rules on device memory read/write.
