This is an old revision of the document!
====== Michael Decker: Driver Development ====== ==== Week C ==== ---- === 13 August === This morning I installed an **iSCSI** server on my laptop. It turned out much simpler than anticipated. I am running Ubuntu 8.04 (Hardy Heron), and it turns out the iSCSI target kernel module is present by default? So, a point & click install via Synaptic Package Manager, and modification of ''/etc/ietd.conf'' was all that was needed. Once working, I tested the **3c59x** driver I've been hacking on recently. Of course there were network errors present, which I didn't see when using AoE. A ''scandisk'' run over DOS froze up the system. I spent a while going through the code and checking suspect areas. I eventually discovered that the Linux code was freeing the tx buffers, which is a no-no in gPXE. This code was fixed to issue ''netdev_tx_complete()'' notifications. Subsequent testing continued showing errors. This baffled me for some time until I decided to reboot the laptop. The next test showed no errors! Interesting. Further testing suddenly showed errors again. I then discovered simply restarting Wireshark would prevent the TCP errors from appearing. Further experimentation resulted in Wireshark crashing unexpectedly!? So, while the universe seems broken, my driver is not :) * [[http://git.etherboot.org/?p=people/mdeck/gpxe.git;a=commit;h=5002142c055dbe3ab9cf9771dfb2cf83740cc988|[Drivers-3c59x] Fixed tx completion & more. Runs well]] I submit this driver for testing by anyone else before I trim out the old Linux driver code.
