This is an old revision of the document!


Installing the Windows SAN Boot Configuration Driver

You need to install the Windows SAN Boot Configuration Driver (sanbootconf). Download the latest version from http://git.etherboot.org/releases/sanbootconf/sanbootconf-latest.zip.

Unzip the file and run sanbootconf.msi:

Installing sanbootconf

If you are running Windows Vista or later, you must enable the use of test-signed kernel drivers by typing

  bcdedit -set TestSigning Yes

in a command window.

Enabling test-signing

After installation is complete, reboot the system and check that it boots up correctly.

You are now ready to:


QR Code
QR Code sanboot:winnt_sanbootconf (generated for current page)