This is an old revision of the document!

A PCRE internal error occured. This might be caused by a faulty plugin

====== Getting iSCSI booting to work with Ubuntu Lucid Lynx 10.04 ====== **(Including logon and ibft support!)** For this example, I will use these values: * iSCSI Qualified Name: * Server ip: * Client ip: * iSCSI username: user * iSCSI password: password * Client disk image: /mnt/disk-images/disk.img ===== Client side setup (initiator): ===== On the client side, install a standard Ubuntu Desktop on a physical or virtual machine. If you use a virtual machine, make the sure disk image is in 'raw' format, meaning no headers or such on the image. If it is a valid raw image, you should be able to see the partition table with, for example “fdisk -l disk.img” or even the “disktype” command, like so: <code> $ disktype disk.img --- disk.img Regular file, size 6 GiB (6442450944 bytes) DOS/MBR partition map Partition 1: 5.858 GiB (6290407424 bytes, 12285952 sectors from 2048, bootable) Type 0x83 (Linux) Ext3 file system UUID 745D45C4-38FA-4B7C-85A3-71D37AE23AF3 (DCE, v4) Volume size 5.858 GiB (6290407424 bytes, 1535744 blocks of 4 KiB) Partition 2: 144 MiB (150994944 bytes, 294912 sectors from 12288000) Type 0x82 (Linux swap / Solaris) Linux swap, version 2, subversion 1, 4 KiB pages, little-endian Swap size 144.0 MiB (150986752 bytes, 36862 pages of 4 KiB) </code> ==== Use the following steps to make the Ubuntu client iSCSI capable: ==== == Paste the following code into a new file called /etc/initramfs-tools/hooks/iscsi: == <code> #!/bin/sh PREREQ="" prereqs() { echo "$PREREQ" } case $1 in prereqs) prereqs exit 0 ;; esac # Begin real processing below this line if [ ! -x /sbin/iscsistart ]; then exit 0 fi . /usr/share/initramfs-tools/hook-functions copy_exec /sbin/iscsistart /sbin for x in scsi_transport_iscsi libiscsi libiscsi_tcp iscsi_tcp \ crc32c iscsi_ibft; do force_load ${x} done </code> == Paste the following code into a new file called /etc/initramfs-tools/scripts/local-top/iscsi: == <code> #!/bin/sh # Do the following so we do not get errors when doing 'update-initramfs -u' if [ ! "$BOOT" = "local" ]; then exit 0 fi # Check if the target exists then start iscsi if [ -e /sys/firmware/ibft/target0/target-name ]; then udevadm settle --timeout=30 # wait for netcard #ip link set eth0 mtu 2500 # Optional: increase mtu for performance ip link set eth0 up # bring the network interface up sleep 5 # wait for the ethernet interface to come up ipconfig -t 10 -c dhcp -d eth0 # get an IP #iscsistart -b # This should get the ibft parameters but it does not work for me # Lets do the following instead iscsistart \ -i `cat /sys/firmware/ibft/initiator/initiator-name` \ -t `cat /sys/firmware/ibft/target0/target-name` \ -a `cat /sys/firmware/ibft/target0/ip-addr` \ -u `cat /sys/firmware/ibft/target0/chap-name` \ -w `cat /sys/firmware/ibft/target0/chap-secret` \ -g 1 fi </code> Make sure that eth0 is set to manual in /etc/network/interfaces so that Network Manager does not try to reconfigure the interface: <code> # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual </code> Then do these commands at the terminal: <code> sudo -s # Become root, if it asks for password, use the users password chmod +x /etc/initramfs-tools/hooks/iscsi # Make your hook script executable chmod +x /etc/initramfs-tools/scripts/local-top/iscsi # Make your script executable apt-get install open-iscsi open-iscsi-utils # Make sure you have the iscsi tools installed update-initramfs -u # Update initramfs with your changes, # the changes will also take effect even with upgrades </code> == Do the following so that your eth0 interface has the same name even if the image is booted on different machines == <code> sudo -s # Change to root access rm /etc/udev/rules.d/70-persistent-net.rules # Get rid of this rule so that your current eth0 interface doesn't get changed rm /lib/udev/rules.d/75-persistent-net-generator.rules # This re-creates the above, so get rid of it too </code> Note: I don't know if the above steps are the best way to make eth0 name static, but this is what works for me. You are now finished with editing the client. Shutdown the client now. ==== Last step: Transfer the image to the server ==== You could just copy the image as is, but it is even smarter to make a sparse file. That way only actual data is copied and not the empty sectors. You can do this under linux with the cp command: <code> cp --sparse=always disk.img /media/server-data/disk-images/disk.img </code> If you installed to a physical machine, boot up the machine with a live linux cd, become root and do this command: <code> cp --sparse=always /dev/sda /media/server-data/disk-images/disk.img </code> ===== Server side setup (target): ===== I am assuming that you are using either Ubuntu or Debian linux on the server. Make sure you have a dhcp and a tftp server installed and that you have followed the directions for setting up gpxe on the dhcp server from Install the "iscsitarget" package using this command: <code>sudo apt-get install iscsitarget</code> Assuming /mnt/disk-images/disk.img is your client image, create the /etc/ietf.conf file with the following contents: <code> Target IncomingUser user password OutgoingUser Lun 0 Path=/mnt/disk-images/disk.img,IOMode=wb,Type=fileio </code> Make sure iscsitarget can start at boot by using this value in /etc/default/iscsitarget <code>ISCSITARGET_ENABLE=true</code> Make the gpxe script /tftpboot/iscsi.gpxe with these contents: <code> dhcp net0 set username user set password password sanboot </code> Edit your dhcpd.conf file and make sure the following is in your gpxe section of the config file: <code> filename=iscsi.gpxe </code> That's it! Start your server by running "sudo /etc/init.d/iscsitarget restart" and boot your pxe client and see what happens. ===== Random Notes ===== * If you don't install any proprietary video drivers, then what you got here is an image that will boot from either iSCSI, USB, or any internal/external disk on any machine. * Since Ubuntu is Debian based, these steps should work with Debian too but I haven't tried it myself * You cannot create sparse images if you copy to a windows or samba network share, use nfs/ssh/nc (netcat) instead. Here is an example with nc (netcat): Client side: <code> cat /dev/sda | nc -l -p 1234 </code> Server side: <code> nc <client-ip> 1234 | cp --sparse=always /dev/stdin disk.img </code> --- //Quinn Plattel 2010/09/22 10:09//

QR Code
QR Code sanboot:ubuntu_iscsi2 (generated for current page)