This is an old revision of the document!

A PCRE internal error occured. This might be caused by a faulty plugin

====== Booting from an iSCSI target ====== Place the following two lines in ///etc/dhcpd.conf//: filename ""; option root-path ""; where // is the DNS name (or IP address) of your iSCSI target, and // is the iSCSI target IQN that you wish to boot from. You will probably need to restart your DHCP server for the changes to take effect: root@chipmunk# /etc/init.d/dhcpd restart Boot your diskless client using gPXE. If all has gone well, you should see it boot from your iSCSI target image. Congratulations on a successful boot from SAN!

QR Code
QR Code sanboot:iscsi_boot (generated for current page)