This is an old revision of the document!

HowTo Guides

This page contains guides to performing a variety of network booting tasks. You'll need to download and build gPXE before trying most of them.

How to deploy gPXE

There are three typical deployment scenarios for gPXE.

How to boot from a web server

gPXE can boot from a web server just as easily as from a TFTP server. Web servers typically scale better than TFTP servers, and don't suffer from the file size limitations and other problems that plague TFTP booting.

How to boot from SAN

Boot from SAN is the process of booting from a remote disk, using a protocol such as iSCSI or AoE. It can be used to boot operating systems that do not generally support network booting, such as Windows Server 2003, Windows XP or Windows Vista.

How to boot Windows PE

Windows PE is the installer for Vista and later versions of Windows. It can be started from the network using gPXE.

How to configure your DHCP server

There are several DHCP options that can be used to control advanced features of gPXE. Instructions are available for

  • ISC dhcpd (as shipped with most Linux distributions)

How to install iSCSI Enterprise Target on Fedora 8

Steps to install the iSCSI Enterprise Target ( on Fedora 8. * iSCSI Enterprise Target on Fedora 8 ===== How to speed up SAN booting ===== Here is a method for speeding up SAN booting and reducing disk space usage. * Setting up Cow Devices ===== How to make a bootable DOS USB flash drive ===== * Making a bootable DOS USB flash drive