This is an old revision of the document!


Installing Windows to an SRP target

You can create customised Windows Server 2008 installation media that will allow you to install Windows directly to your SRP SAN target. (You cannot do this using the standard installation DVD-ROM; you must customise it first.)

Install the Windows AIK

Download and install the Automated Installation Kit (AIK) for Windows Vista SP1 and Windows Server 2008 from http://www.microsoft.com/downloads/details.aspx?familyid=94BB6E34-D890-4932-81A5-5B50C657DE08.

Creating an installation medium

Insert the Windows Server 2008 DVD-ROM and a blank USB key. Start up a command prompt and use diskpart to list the disks on your system:

  C:\Users\Administrator> diskpart
  
  Microsoft DiskPart version 6.0.6002
  Copyright (C) 1999-2007 Microsoft Corporation.
  On computer: WIN-8AHI8ZB7YBM
  
  DISKPART> list disk
  
    Disk ###  Status      Size     Free     Dyn  Gpt
    --------  ----------  -------  -------  ---  ---
    Disk 0    Online       466 GB      0 B
    Disk 1    Offline       40 GB      0 B
    Disk 2    Online      3817 MB      0 B

Select the USB key:

  DISKPART> select disk N

where N is the number of the disk corresponding to your blank USB key (“Disk 2” in the above example). Create a new bootable partition on the USB key:

  DISKPART> clean
  DISKPART> create partition primary
  DISKPART> select partition 1
  DISKPART> active
  DISKPART> format fs=fat32
  DISKPART> assign
  DISKPART> exit

Copy the contents of the Windows Server 2008 DVD-ROM to the USB key:

  xcopy /e /f D:\*.* E:\

(where D: is the drive letter of your DVD-ROM drive, and E: is the drive letter of your newly-formatted USB key).

Preparing the unattended installation file

Use Notepad to create a file containing:

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
  <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup"
               processorArchitecture="amd64"
               publicKeyToken="31bf3856ad364e35"
               language="neutral"
               versionScope="nonSxS"
               xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
      <RunSynchronous>
        <RunSynchronousCommand wcm:action="add">
          <Order>1</Order>
          <Path>cmd.exe /k for /f %i in (&apos;dir /s /b %WINDIR%\inf\oem*.inf&apos;) do drvload %i</Path>
        </RunSynchronousCommand>
      </RunSynchronous>
    </component>
  </settings>
  <settings pass="generalize">
    <component name="Microsoft-Windows-PnpSysprep"
               processorArchitecture="amd64"
               publicKeyToken="31bf3856ad364e35"
               language="neutral"
               versionScope="nonSxS">
      <PersistAllDeviceInstalls>true</PersistAllDeviceInstalls>
    </component>
  </settings>
</unattend>

and save it E:\autounattend.xml (where E: is the driver letter of your USB key).

Preparing the iamgex configuration file

Use Notepad to create a file containing:

[ExclusionList]
ntfs.log
hiberfil.sys
pagefile.sys
"System Volume Information"
RECYCLER
Windows\CSC

[CompressionExclusionList]
*.mp3
*.zip
*.cab
\WINDOWS\inf\*.pnf

and save it as E:\wimscript.ini (where E: is the driver letter of your USB key).

Preparing the boot image

Download the correct version of Windows OpenFabrics from http://www.openfabrics.org/downloads/WinOF/ and unzip the .msi installer file. Unpack the driver files to a temporary location:

  msiexec -a WinOF_2-1_wlh_x64.msi -qb TARGETDIR=%TMP%\WinOF

Start up a Windows PE Tools Command Prompt (StartAll ProgramsMicrosoft Windows AIKWindows PE Tools Command Prompt) and mount the boot image file:

  mkdir %TMP%\Mount
  imagex /mountrw E:\sources\boot.wim 2 %TMP%\Mount

(where E: is the driver letter of your USB key). Add the imagex command and configuration file to the boot image:

  copy ..\%PROCESSOR_ARCHITECTURE%\imagex.exe %TMP%\Mount
  copy E:\wimscript.ini %TMP%\Mount

Add the WinOF drivers to the boot image:

  cd %TMP%\WinOF\PFiles\WinOF\Drivers
  for /f %i in ('dir *.inf /s /b') do peimg /inf=%i %TMP%\Mount

Commit the changes to the boot image:

  imagex /unmount /commit %TMP%\Mount

QR Code
QR Code appnotes:srp_install (generated for current page)