[gPXE] Windows 7 transfer to a iSCSI target

[Ozan Yerli]

I tried booting to the Safe Mode, it hangs after saying:
\Windows\System32\DRIVERS\disk.sys
\Windows\System32\DRIVERS\CLASSPNP.sys

So, the problem is probably related to them.

2010/6/5 Ozan Yerli <oyerli at gmail.com>:
> Thanks for your quick reply. Yes, that was the problem, I changed it
> to your suggestion and that fixed the problem.
>
> But now I have another one :) I get the Windows 7 logo with the text
> Windows is starting, after that nothing happens. The computer hangs.
>
> What might be the reason for this, is there anything I can do to get
> more information about what is happening in the background (something
> like a debug mode).
>
> By the way, I have enabled autostart of the iSCSI service of the
> Windows 7, so that must not be the problem here.
>
> 2010/6/5 Joseph L. Casale <jcasale at activenetwerx.com>:
>>>Target iqn.2009-07.98.10.168.192:iscsiboot
>>>        Lun 0 Path=/dev/sdb1,Type=fileio
>>>
>>
>>>I get the message Booting as expected but immidiately after it hangs
>>>with the error message:
>>>"A Disk Read Error Occured. Press CTRL+ALT+DEL to restart"
>>>
>>>What might be the problem?
>>
>> Probably the fact you have not exposed the "disc" but a partition only.
>> There is no boot sector...
>>
>> Target iqn.2009-07.98.10.168.192:iscsiboot
>>        Lun 0 Path=/dev/sdb,Type=fileio
>>
>> hth,
>> jlc
>>
>