[gPXE] Windows 7 transfer to a iSCSI target

[Ozan Yerli]

Thanks for your quick reply. Yes, that was the problem, I changed it
to your suggestion and that fixed the problem.

But now I have another one :) I get the Windows 7 logo with the text
Windows is starting, after that nothing happens. The computer hangs.

What might be the reason for this, is there anything I can do to get
more information about what is happening in the background (something
like a debug mode).

By the way, I have enabled autostart of the iSCSI service of the
Windows 7, so that must not be the problem here.

2010/6/5 Joseph L. Casale <jcasale at activenetwerx.com>:
>>Target iqn.2009-07.98.10.168.192:iscsiboot
>>        Lun 0 Path=/dev/sdb1,Type=fileio
>>
>
>>I get the message Booting as expected but immidiately after it hangs
>>with the error message:
>>"A Disk Read Error Occured. Press CTRL+ALT+DEL to restart"
>>
>>What might be the problem?
>
> Probably the fact you have not exposed the "disc" but a partition only.
> There is no boot sector...
>
> Target iqn.2009-07.98.10.168.192:iscsiboot
>        Lun 0 Path=/dev/sdb,Type=fileio
>
> hth,
> jlc
>