[gPXE] sanboot failed for intel motherboard - s3200sh

[Aclhk Aclhk]

thank you for your advice. the boot code was installed to local hdd without notice. after the local hdd was removed before installation, iscsi boot was ok.

i have another question. the booting stopped for kernel-xen and ok for normal kernel. attached is the screen capture.

booting kernel-xen using local hdd is ok.

pls advise.

--- 2010年2月9日 星期二，Shao Miller <Shao.Miller at yrdsb.edu.on.ca> 寫道﹕

寄件人: Shao Miller <Shao.Miller at yrdsb.edu.on.ca>
主題: Re: [gPXE] sanboot failed for intel motherboard - s3200sh
收件人: "Aclhk Aclhk" <aclhkaclhk at ymail.com>
副本(CC): gpxe at etherboot.org
日期: 2010年2月9日,星期二,下午3:30




  
  
Aclhk Aclhk wrote:

  
    
      
        i have install centos 5.4-64bit. I followed your
instruction to install the diag MBR.

        

sanboot iscsi:192.168.1.1::::iscsi-gpxe

Registered as BIOS drive 0x80

Booting from BIOS drive 0x80

L D80 C3FF HFF S3F P1 O0000003F M0000 E00

        

the booting then stopped.
      
    
  



Thanks to T. J. who produced this diagnostic MBR, we can easily see
that your boot-sector at sector 63 (O...3F) for your active partition
has no magic (M0000 instead of MAA55).  I'd bet there's no boot-code
installed on your active partition's boot-sector.  Is this what you
were expecting?



- Shao Miller


 



      Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://etherboot.org/pipermail/gpxe/attachments/20100209/c3de8a06/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gpxe-iscsi-kernel-xen-boot-error.jpg
Type: image/jpeg
Size: 42031 bytes
Desc: not available
Url : http://etherboot.org/pipermail/gpxe/attachments/20100209/c3de8a06/attachment-0001.jpg