Differences

This shows you the differences between two versions of the page.

--- winpe [2008/03/02 11:56]
mcb30
+++ winpe [2010/06/05 07:34] (current)
sha0 Add info about next-server DHCP option
@@ Line 1: / Line 1: @@
 ====== Booting Windows PE ======
+{{:screenshots:windows_aik.png?303×222 |Windows AIK installation screen}}
 ===== Overview =====
-Windows Preinstallation Environment (WinPE) is a network-bootable version of Windows designed for installation, troubleshooting or system recovery.  It is not a fully-functional Windows system; it can be used only for these specific tasks.  If you want to boot a fully functional version of Windows, you need to [[:sanboot|Boot from SAN]] instead.
+Windows Preinstallation Environment (WinPE) is a network-bootable version of Windows designed for installation, troubleshooting or system recovery.  It is not a general-purpose Windows system; it can be used only for these specific tasks.  If you want to boot a fully functional version of Windows, you need to [[:sanboot|Boot from SAN]] instead.
 ===== Obtaining Windows AIK =====
-Windows PE is available as part of the Windows Automated Installation Kit (AIK).  Download the AIK from its home page at [[http://www.microsoft.com/downloads/details.aspx?FamilyID=c7d4bc6d-15f3-4284-9123-679830d629f2&DisplayLang=en]], or from the direct download at [[http://download.microsoft.com/download/8/6/d/86d6ba9c-98ff-444e-87ed-3e76772eb2a6/vista_6000.16386.061101-2205-LRMAIK_EN.img]].
+Windows PE is available as part of the Windows Automated Installation Kit (AIK).  Download the AIK from its home page at [[http://www.microsoft.com/downloads/details.aspx?FamilyID=94BB6E34-D890-4932-81A5-5B50C657DE08&displaylang=en]], or from the direct download at [[http://download.microsoft.com/download/9/c/d/9cdfa30e-5901-40e4-b6bf-4a0086ea0a6a/6001.18000.080118-1840-kb3aikl_en.iso]].
 Install the AIK onto a working Windows system (the "technician computer").  The installation requires around 1GB of disk space.
 ===== Setting up WinPE =====
-Open the Windows PE Tools Command Prompt (//Start// -> //All Programs// -> //Microsoft Windows AIK// -> //Windows PE Tools Command Prompt//) and enter the following commands:
+Open the Windows PE Tools Command Prompt (//Start// -> //All Programs// -> //Microsoft Windows AIK// -> //Windows PE Tools Command Prompt//) and enter the following commands (some of which are case-sensitive). Note that if you intending to install a 64 bit version of Windows, the second command below should specify "amd64" instead of "x86" (amd64 is a generic reference to 64 bit support which includes support for both AMD and Intel based 64bit hardware):
     mkdir C:\Temp
-    copype x86 C:\Temp\Boot
+    call copype.cmd x86 C:\Temp\Boot
+    del /Q etfsboot.com
+    move ISO\boot\boot.sdi boot.sdi
+    rmdir /S /Q ISO
     imagex /mount winpe.wim 1 mount
     copy mount\Windows\Boot\PXE\pxeboot.n12 pxeboot.n12
     copy mount\Windows\Boot\PXE\bootmgr.exe bootmgr.exe
+    copy mount\Windows\System32\bcdedit.exe bcdedit.exe
     imagex /unmount mount
-    copy ISO\boot\boot.sdi boot.sdi
+    rmdir /Q mount
+    bcdedit -createstore BCD
+    set BCDEDIT=bcdedit -store BCD
+    %BCDEDIT% -create {ramdiskoptions} -d "Ramdisk options"
+    %BCDEDIT% -set {ramdiskoptions} ramdisksdidevice boot
+    %BCDEDIT% -set {ramdiskoptions} ramdisksdipath \Boot\boot.sdi
+    for /f "tokens=3" %a in ('%BCDEDIT% -create -d "Windows PE" -application osloader') do set GUID=%a
+    %BCDEDIT% -set %GUID% systemroot \Windows
+    %BCDEDIT% -set %GUID% detecthal Yes
+    %BCDEDIT% -set %GUID% winpe Yes
+    %BCDEDIT% -set %GUID% osdevice ramdisk=[boot]\Boot\winpe.wim,{ramdiskoptions}
+    %BCDEDIT% -set %GUID% device ramdisk=[boot]\Boot\winpe.wim,{ramdiskoptions}
+    %BCDEDIT% -create {bootmgr} -d "Windows Boot Manager"
+    %BCDEDIT% -set {bootmgr} timeout 30
+    %BCDEDIT% -set {bootmgr} displayorder %GUID%
+    del /Q bcdedit.exe
+Note: When using inside a batch file, replace %a with %%a  (twice) in the "for" command parameters.
+===== Transferring WinPE to a TFTP server =====
+Copy the //C:\Temp\Boot// directory to your TFTP server.  The //Boot// directory must appear directly within your TFTP server's root.  For example, if your TFTP server is running on a Linux system and the TFTP server root is ///var/lib/tftpboot//, then the //C:\Temp\Boot// directory must be copied as ///var/lib/tftpboot/Boot//.
+Several of the filenames are case-sensitive, and you **must** ensure that the case is preserved when you copy the files.  Assuming that your TFTP server root is ///var/lib/tftpboot//, the filenames should appear as:
+  * ''/var/lib/tftpboot/Boot''
+  * ''/var/lib/tftpboot/Boot/pxeboot.n12''
+  * ''/var/lib/tftpboot/Boot/bootmgr.exe''
+  * ''/var/lib/tftpboot/Boot/BCD''
+  * ''/var/lib/tftpboot/Boot/winpe.wim''
+  * ''/var/lib/tftpboot/Boot/boot.sdi''
+===== Configuring DHCP and TFTP =====
+Configure your DHCP server to hand out //"\Boot\pxeboot.n12"// as the boot filename.
+**For ISC DHCPD**, you can do this by adding the following to ///etc/dhcpd.conf//.
+    next-server XXX.XXX.XXX.XXX;
+    filename "\\Boot\\pxeboot.n12";
+where the **next-server** details either the IP address or DNS hostname of your TFTP server.
+{{ :warning.png}}
+<sub>Note that you **must** use a backslash (\) as the path separator, rather than the more usual forward slash (/).  If you use a forward slash, //pxeboot.n12// will be unable to locate //bootmgr.exe// and the boot will fail.  Your TFTP server must be configured to support the use of backslashes as path separators; see [[:tftp_backslash|Supporting broken TFTP clients]] for instructions on configuring your TFTP server to do this.
+Note also that each backslash is doubled within ///etc/dhcpd.conf//; this is because ISC DHCPD treats a backslash as an escape character.</sub>
+**For Microsoft DHCP Server**, set the following options
+    Option Number       Option Name           Value
+                 Boot Server           XXX.XXX.XXX.XXX
+                 Bootfile Name         boot\pxeboot.n12
+where option 66 refers to your TFTP server's IP address or DNS hostname.
+===== Booting WinPE =====
+Boot your diskless client using gPXE.  If all has gone well, you should see it boot from your WinPE image.  It takes quite a long time, since WinPE downloads over 160MB of data via TFTP and also seems to occasionally spend several minutes sitting at a blank screen apparently doing nothing.
+{{ :screenshots:winpe.png?400x300 |Windows PE booted via gPXE}}
+Congratulations on a successful boot of Windows PE!

Trace: • soc • journal • e1000 • ideas • romburning • willem • audit-the-shifts • project_plan

Differences

Navigation

Search

Toolbox

QR Code