Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
winpe [2010/01/19 17:39]
billmc added note regarding x64 support
winpe [2010/04/20 13:58]
jrc3
Line 60: Line 60:
 ===== Configuring DHCP and TFTP ===== ===== Configuring DHCP and TFTP =====
  
-Configure your DHCP server to hand out //"​\Boot\pxeboot.n12"//​ as the boot filename. ​ For ISC DHCPD, you can do this by adding+Configure your DHCP server to hand out //"​\Boot\pxeboot.n12"//​ as the boot filename.  ​ 
 + 
 +**For ISC DHCPD**, you can do this by adding ​the following to ///​etc/​dhcpd.conf//​.
  
     filename "​\\Boot\\pxeboot.n12";​     filename "​\\Boot\\pxeboot.n12";​
- 
-to ///​etc/​dhcpd.conf//​. 
  
 {{ :​warning.png}} {{ :​warning.png}}
  
-Note that you **must** use a backslash (\) as the path separator, rather than the more usual forward slash (/).  If you use a forward slash, //​pxeboot.n12//​ will be unable to locate //​bootmgr.exe//​ and the boot will fail.  Your TFTP server must be configured to support the use of backslashes as path separators; see [[:​tftp_backslash|Supporting broken TFTP clients]] for instructions on configuring your TFTP server to do this.+<sub>Note that you **must** use a backslash (\) as the path separator, rather than the more usual forward slash (/).  If you use a forward slash, //​pxeboot.n12//​ will be unable to locate //​bootmgr.exe//​ and the boot will fail.  Your TFTP server must be configured to support the use of backslashes as path separators; see [[:​tftp_backslash|Supporting broken TFTP clients]] for instructions on configuring your TFTP server to do this. 
 + 
 +Note also that each backslash is doubled within ///​etc/​dhcpd.conf//;​ this is because ISC DHCPD treats a backslash as an escape character.</​sub>​ 
 + 
 +**For Microsoft DHCP Server**, set the following options
  
-Note also that each backslash is doubled within ///​etc/​dhcpd.conf//;​ this is because ISC DHCPD treats a backslash as an escape character.+    Option Number ​      ​Option Name           ​Value 
 +    067                 ​Bootfile Name         ​boot\pxeboot.n12
  
 ===== Booting WinPE ===== ===== Booting WinPE =====

QR Code
QR Code winpe (generated for current page)