Differences

This shows you the differences between two versions of the page.

Link to this comparison view

windowsntloader [2006/06/25 08:00] (current)
stockholm created, slightly rewritten from old wiki
Line 1: Line 1:
 +==== Load Etherboot from a Windows 2000/XP NT loader ====
 +This page describes a possibility to add Etherboot to a Windows 2000/​Windows XP only machine. ​
  
 +=== Standard disclaimer: ===
 +Make a backup. Following the steps described on this page might very well destroy your operating system, data or mp3 files on your hard drive, or even worse things. I tried this at home, and it worked fine. I recommend you to try this on a non-production system before deploying a solution based on the methods described below. ​
 +=== Example setup ===
 + I have a Windows-XP only machine that I want to run as Etherboot terminal, besides ocasionally using the Windows it came preinstalled with. It is a laptop machine with onboard NIC, so flashing a ROM or fiddling with the BIOS is no option. Creating partitions or changing the current paritioning at all (only one NTFS drive) is no option either. So, lilo will not work. A standard grub setup will not work. Etherboot can not directly be loaded by NTLoader. ​
 +
 +=== Tools needed ===
 +  * A patched grub (download location below), an etherboot .zlilo file 
 +
 +=== Requirements ===
 +  * I assume that your machine has an IDE harddrive which is partition into a single NTFS partition (or at least, the first partition on the drive is NTFS and the Windows C: and boot partition).
 +  * That partition must not be compressed nor encrypted nor on a dynamic drive (if you don't know what that means, you may hope not to have that :-).
 +  * You need Administrator privileges on the machine in question. ​
 +
 +=== Step by step ===
 +I first downloaded the NTFS capable grub installer package from [[http://​www.geocities.com/​lode_leroy/​grubinstall/​]] (the binary installer file will do). I got a .tar.gz file (luckily WinZIP opens those) and decompressed it into the directory ''​C:​\boot''​
 +
 +Make sure you now have the following files in ''​C:​\boot'':​
 +  * stage1 ​
 +  * stage2 ​
 +  * grubinstaller.exe ​
 +
 +Go to [[http://​www.rom-o-matic.net/​|Rom-O-Matic]] and fetch an etherboot image in ''​.zlilo''​ format. I chose to "​configure ROM" and set the delay to "​-1"​ seconds - meaning no delay at all. Save that ''​.zlilo''​ file to ''​C:​\boot\etherb.zli''​ (I chose that filename and use it throughout this example. If you want, call it "​winnieh.poo"​ :-) 
 +
 +Create a file ''​C:​\boot\menu.lst''​ with the following contents: ​
 +<​file>​default 0 
 +timeout 0 
 +hiddenmenu ​
 +title Etherboot ​
 +root (hd0,​0) ​
 +kernel /​boot/​etherb.zli
 +</​file>​
 +Open a "​Command prompt"​ (Run "​cmd"​) and enter 
 +<​code>​cd \boot 
 +grubinstall </​code>​
 +If you got something like 
 +<​file>​
 +NTFS mount succeeded ​
 +stage1(12489151) ​
 +version=3.2 ​
 +boot_drive=0xff ​
 +force_lba=0 ​
 +stage2_address=0x8000 ​
 +stage2_sector=12489151 ​
 +stage2_segment=0x800 ​
 +stage2(12489151+214) ​
 +213 sectors to load from sector 12489152 at 0x820 
 +menu '​(hd0,​0)/​boot/​menu.lst' ​
 +stage2 configured on (hd0,​0). ​
 +</​file>​
 +it probably worked OK. 
 +
 +Next, mark all files in ''​C:​\boot''​ to be "​system files" and "​read-only"​ (else a defragmentation might scatter those files over the harddrive, bringing grub into trouble) ​
 +Edit the file ''​C:​\boot.ini'',​ adding a line under the  ''​[operating systems]'' ​ section like  <​file>​C:​\boot\stage1="​Etherboot" ​ </​file>​
 +
 +Reboot your machine ​
 +
 +An operating system chooser should come up, offering Etherboot as one of the boot options. If you run it, grub should be loaded, immediately followed by etherboot, which should find your network card and do the usual DHCP/TFTP steps 

QR Code
QR Code windowsntloader (generated for current page)