Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
soc:2009:dverkamp:notes:windows_xp_iscsi [2009/06/08 10:49] drv |
soc:2009:dverkamp:notes:windows_xp_iscsi [2009/06/12 15:46] (current) drv |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| == Test == | == Test == | ||
| - | Boot into a Windows XP operating system stored on an iSCSI target that requires forward CHAP authentication. | + | Boot into a Windows XP operating system stored on an iSCSI target. |
| == DUT configuration == | == DUT configuration == | ||
| - | No physical disks present. System configured to boot from NIC equipped with gPXE ROM. NIC non-volatile storage configured with iSCSI username and password. | + | No physical disks present. System configured to boot from NIC equipped with gPXE ROM. |
| == Environment configuration == | == Environment configuration == | ||
| - | iSCSI target running IETD set up to require forward CHAP authentication. DHCP server providing network configuration and iSCSI root-path, but not providing iSCSI username and password (which are held in the DUT's non-volatile storage). | + | iSCSI target running IETD set up to require forward CHAP authentication. DHCP server providing network configuration and iSCSI root-path. |
| == Result == | == Result == | ||
| Line 35: | Line 35: | ||
| After the first reboot, allow booting from hard disk (do not press a key at the "Boot from CD" prompt). | After the first reboot, allow booting from hard disk (do not press a key at the "Boot from CD" prompt). | ||
| - | First try at the graphical stage of setup got stuck at "Installing Devices" for at least an hour. TODO: investigate if this is due to kqemu or other environmental factors. Restarting QEMU allows it to continue... | + | First try at the graphical stage of setup got stuck at "Installing Devices" for at least an hour. TODO: investigate if this is due to kqemu or other environmental factors, or restart QEMU between setup stages. Restarting QEMU allows it to continue... |
| + | Enter a name ("Test" for this example), then enter the product key. | ||
| + | Accept the default computer name and blank administrator password. | ||
| + | |||
| + | Accept the default time configuration. | ||
| + | |||
| + | Accept the default network configuration and workgroup. | ||
| + | |||
| + | After this stage of setup completes and another reboot, setup is complete. | ||
| + | |||
| + | Click OK on the Display Settings dialog to adjust the screen resolution, then click OK to accept the change. | ||
| + | |||
| + | After some time, the first-run wizard appears; press Next. | ||
| + | |||
| + | Select "Not now" on the Windows Update page, then click Next. | ||
| + | |||
| + | Click "Skip" on the network configuration page. | ||
| + | |||
| + | Select "No" on the activation page and click Next. | ||
| + | |||
| + | Enter "Test" as the first username and click Next. | ||
| + | |||
| + | Click Finish. | ||
| + | |||
| + | At this point, you should be at the Windows desktop. | ||
| + | |||
| + | TODO: Network adapter did not acquire an address from QEMU's DHCP server; reboot allowed it to work. | ||
| + | |||
| + | == iSCSI initiator setup == | ||
| + | |||
| + | Download the Microsoft iSCSI [[http://download.microsoft.com/download/C/0/3/C0326CE2-51D0-4E1C-A9E0-7E16BE79410B/CHK-Boot/Initiator-2.08-boot-build3825-x86chk.exe|initiator]] in the VM, then run the installer. | ||
| + | |||
| + | Select "Initiator Service" and "Software Initiator" only, then click Next. | ||
| + | |||
| + | Select "I agree", then click Next. | ||
| + | |||
| + | Click Finish when the installation is complete. | ||
| + | |||
| + | Download http://git.etherboot.org/releases/sanbootconf/sanbootconf-latest.zip and extract it, then run install.bat. | ||
| + | |||
| + | Now setup is complete; shut down the Windows machine. | ||
| + | |||
| + | == iSCSI target setup == | ||
| + | |||
| + | On the iSCSI target machine, edit ''/etc/ietd.conf'' to add a target. | ||
| + | |||
| + | Target iqn.2000-01.test.etherboot.org:iscsiboot.xp | ||
| + | Lun 0 Path=/path/to/hd.img | ||
| + | IncomingUser testuser userpassword | ||
| + | OutgoingUser testtarget targetpassword | ||
| + | |||
| + | Ensure the iSCSI target is running. (ex. Gentoo: ''/etc/init.d/ietd start'') | ||
| + | |||
| + | == Booting with gPXE == | ||
| + | |||
| + | TODO: authentication | ||
| + | |||
| + | Create a gPXE script as follows and boot it: | ||
| + | |||
| + | #!gpxe | ||
| + | sanboot iscsi:my.target.dns.name::::iqn.2000-01.test.etherboot.org:iscsiboot.xp | ||
| + | |||
| + | (where my.target.dns.name is the DNS name or IP of the machine running the iSCSI target) | ||
| + | |||
| + | Windows should boot to the desktop. | ||
| + | |||
| + | {{:soc:2009:dverkamp:notes:winxp-iscsi-rh.png|}} | ||
