Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sanboot:winnt_iscsi [2008/03/01 17:35]
mcb30 Added screenshots, and warning about not using multipath support.
sanboot:winnt_iscsi [2009/10/29 15:48]
mcb30
Line 3: Line 3:
 You need to install the Microsoft iSCSI Software Initiator Boot Version. ​ This is **not** the standard Microsoft iSCSI Initiator; you do need the special boot-capable version. ​ At the time of writing, this is available in four versions: You need to install the Microsoft iSCSI Software Initiator Boot Version. ​ This is **not** the standard Microsoft iSCSI Initiator; you do need the special boot-capable version. ​ At the time of writing, this is available in four versions:
  
-  * [[http://​download.microsoft.com/​download/​9/6/8/968031d1-6e4b-47f3-9faa-cb43825f93f0/​Initiator-2.06-boot-build3497-x86chk.exe|Initiator-2.06-boot-build3497-x86chk.exe]] +  * [[http://​download.microsoft.com/​download/​C/0/3/C0326CE2-51D0-4E1C-A9E0-7E16BE79410B/​CHK-Boot/​Initiator-2.08-boot-build3825-x86chk.exe|Initiator-2.08-boot-build3825-x86chk.exe]] 
-  * [[http://​download.microsoft.com/​download/​9/​6/8/968031d1-6e4b-47f3-9faa-cb43825f93f0/​Initiator-2.06-boot-build3497-x86fre.exe|Initiator-2.06-boot-build3497-x86fre.exe]] + 
-  * [[http://​download.microsoft.com/​download/​9/6/8/968031d1-6e4b-47f3-9faa-cb43825f93f0/​Initiator-2.06-boot-build3497-x64chk.exe|Initiator-2.06-boot-build3497-x64chk.exe]] +  * [[http://​download.microsoft.com/​download/​9/​D/D/9DDCBA19-26D6-4B63-B769-242A3991E4EA/​Fre-Boot/​Initiator-2.08-boot-build3825-x86fre.exe|Initiator-2.08-boot-build3825-x86fre.exe]] 
-  * [[http://​download.microsoft.com/​download/​9/​6/8/968031d1-6e4b-47f3-9faa-cb43825f93f0/​Initiator-2.06-boot-build3497-x64fre.exe|Initiator-2.06-boot-build3497-x64fre.exe]]+ 
 +  * [[http://​download.microsoft.com/​download/​C/0/3/C0326CE2-51D0-4E1C-A9E0-7E16BE79410B/​CHK-Boot/​Initiator-2.08-boot-build3825-x64chk.exe|Initiator-2.08-boot-build3825-x64chk.exe]] 
 + 
 +  * [[http://​download.microsoft.com/​download/​9/​D/D/9DDCBA19-26D6-4B63-B769-242A3991E4EA/​Fre-Boot/​Initiator-2.08-boot-build3825-x64fre.exe|Initiator-2.08-boot-build3825-x64fre.exe]]
  
 You almost certainly want the //-x86chk// version, unless you are running 64-bit Windows (in which case you want the //-x64chk// version). You almost certainly want the //-x86chk// version, unless you are running 64-bit Windows (in which case you want the //-x64chk// version).
Line 14: Line 17:
 {{ :​screenshots:​winnt_iscsi_no_multipath.png?​503x386 |Deselecting MPIO support}} {{ :​screenshots:​winnt_iscsi_no_multipath.png?​503x386 |Deselecting MPIO support}}
  
-Make sure to enable ​the "​Configure iSCSI Network Boot Support" ​option, and to select the network card that will be used for iSCSI boot.+If you are presented with the option to "​Configure iSCSI Network Boot Support", ​then you must enable this option ​and select the network card that will be used for iSCSI boot.
  
 {{ :​screenshots:​winnt_iscsi_boot_nic.png?​503x386 |Selecting boot NIC}} {{ :​screenshots:​winnt_iscsi_boot_nic.png?​503x386 |Selecting boot NIC}}
Line 20: Line 23:
 After installation is complete, reboot the system and check that it boots up correctly. After installation is complete, reboot the system and check that it boots up correctly.
  
-You are now ready to:+If you are using Windows 2003 or later, and were given the option to "​Configure iSCSI Network Boot Support"​ during installation,​ then you are now ready to: 
 + 
 +  * [[:​sanboot:​transfer|Transfer the Microsoft Windows disk image to your iSCSI target]] 
 + 
 +If you are using Windows XP, or were not given the option to "​Configure iSCSI Network Boot Support"​ during installation,​ then you must now
  
-  * [[sanboot:transfer|Transfer ​the Microsoft ​Windows ​disk image to your iSCSI target]]+  * [[:sanboot:winnt_sanbootconf|Install ​the Windows ​SAN Boot Configuration Driver]]
  

Navigation

* [[:start|Home]] * [[:about|About our Project]] * [[:download|Download]] * [[:screenshots|Screenshots]] * Documentation * [[:howtos|HowTo Guides]] * [[:appnotes|Application Notes]] * [[:faq:|FAQs]] * [[:doc|General Doc]] * [[:talks|Videos, Talks, and Papers]] * [[:hardwareissues|Hardware Issues]] * [[:mailinglists|Mailing lists]] * [[http://support.etherboot.org/|Bugtracker]] * [[:contributing|Contributing]] * [[:editing_permission|Wiki Edit Permission]] * [[:wiki:syntax|Wiki Syntax]] * [[:contact|Contact]] * [[:relatedlinks|Related Links]] * [[:commerciallinks|Commercial Links]] * [[:acknowledgements|Acknowledgements]] * [[:logos|Logo Art]]

QR Code
QR Code sanboot:winnt_iscsi (generated for current page)