Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
sanboot:winnt_aoe [2008/02/18 15:16]
v
sanboot:winnt_aoe [2008/02/20 19:46]
mcb30 Edited for consistency of style with other SAN booting HowTos
Line 1: Line 1:
 ====== Adding AoE boot support to Microsoft Windows ====== ====== Adding AoE boot support to Microsoft Windows ======
  
-First download ​the latest WinAoE package from [[http://​winaoe.org/​|winaoe.org]] and extract all files to a directory.+===== Installing ​the AoE initiator =====
  
-Then go to:+You need to download and install the Windows AoE initiator (WinAoE). ​ Download the latest WinAoE package from [[http://​winaoe.org/​]] and extract the contents of the .zip file to a temporary directory.
  
-Control Panel -> Add Hardware+Start up the Add Hardware Wizard (//Start// -> //Control Panel// -> //Add Hardware//) and proceed to the "Is the hardware connected?"​ screen:
  
-{{winaoe:winaoe01.png}}+{{ winaoe:winaoe03.png }}
  
-"Next"+Click on "Yes, I have already connected the hardware", then click on //Next//.
  
-{{winaoe:winaoe02.png}}+{{ winaoe:winaoe04.png }}
  
-Wait a few seconds ​to minutes+Scroll down to the bottom of the list and choose "Add a new hardware device",​ then click on //Next//.
  
-{{winaoe:winaoe03.png}}+{{ winaoe:winaoe05.png }}
  
-"Yes, I have already connected ​the hardware"​+Click on "Install ​the hardware ​that I manually select from a list (Advanced)", then click on //Next//.
  
-{{winaoe:winaoe04.png}}+{{ winaoe:winaoe06.png }}
  
-"Add a new hardware device"+Choose ​"SCSI and RAID controllers", then click on //Next//.
  
-{{winaoe:winaoe05.png}}+{{ winaoe:winaoe07.png }}
  
-"Install the hardware that I manually select from a list (Advanced)"+Click on "Have Disk...".
  
-{{winaoe:winaoe06.png}}+{{ winaoe:winaoe08.png }}
  
-"SCSI and RAID controllers"+Click on "Browse...".  Browse to the directory containing the extracted WinAoE files, then to the //bin// directory within this directory. ​ Click on "​OK"​. ​ You should see "AoE Driver"​ show up in a list of available drivers to install:
  
-{{winaoe:winaoe07.png}}+{{ winaoe:winaoe09.png }}
  
-"Have Disk..."+Continue clicking on //Next// until the installation process is complete You will see a warning about the driver being unsigned:
  
-{{winaoe:winaoe08.png}}+{{ winaoe:winaoe11.png }}
  
-Select ​"Browse...", browse ​to the bin directory from the unpacked WinAoE directory and press ok.+Ignore this warning and click on "Continue Anyway" to complete ​the installation of the AoE initiator.
  
-{{winaoe:​winaoe09.png}}+===== Identifying the network service name =====
  
-"Next"+Open up the System Properties (//Start// -> //Control Panel// -> //System//) and go to the //​Hardware//​ tab.  Click on "Device Manager".
  
-{{winaoe:winaoe10.png}}+{{ winaoe:winaoe14.png }}
  
-"Next"+Locate your network card within the device list.  Right-click on your network card and choose ​"Properties".
  
-{{winaoe:winaoe11.png}}+{{ winaoe:winaoe15.png }}
  
-"Continue Anyway"+Go to the //Details// tab and choose ​"Service" ​from the drop-down menu.  Make a note of the network card service name ("​E1000"​ in the above example).
  
-{{winaoe:​winaoe12.png}}+===== Enabling network boot =====
  
-"​Finish"​+Start up Registry Editor (//Start// -> //Run// -> //​regedit//​) and browse to the key //​HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services//​.
  
-You are now done with installing the WinAoE driver. +{{ winaoe:​winaoe16.png }}
-You should be able to run the "​aoe"​ utility in a command prompt to get general aoe mount/​unmount and scan functionality.+
  
-Next steps make the disk ready for booting over SAN.+Click on the network card service key ("​E1000"​ in this example), then double-click on "​Start"​ in the right-hand panel.
  
-First go to:+{{ winaoe:winaoe17.png }}
  
-Control Panel -> System, and select ​the "​Hardware"​ tab.+Change ​the //Value data// to 0 and click on //OK//.
  
-{{winaoe:​winaoe13.png}} +You are now ready to
- +
-"​Device Manager"​ +
- +
-{{winaoe:​winaoe14.png}} +
- +
-press the + in front of "​Network adapters"​ and select the network adapter you will be booting over.Rightclick on that one and choose "​Properties"​ +
- +
-{{winaoe:​winaoe15.png}} +
- +
-In the Properties screen go to the tab "​Details"​ and choose "​Service"​ in the pulldown menu. +
-Note the service name for the next step. +
- +
-{{winaoe:​winaoe16.png}} +
- +
-Open regedit (Start -> Run -> "​regedit"​) and browse to the key "​HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services"​. +
-There browse to the key which you found in the last step (the "​Service"​ of the network adapter) +
- +
-{{winaoe:​winaoe17.png}} +
- +
-Double click the "​Start"​ key on the left panel, change the Value data to 0 and press Ok. +
- +
-You are now done with installing WinAoE with boot support.+
  
   * [[sanboot:​transfer|Transfer the Microsoft Windows disk image to your AoE target]]   * [[sanboot:​transfer|Transfer the Microsoft Windows disk image to your AoE target]]
  

QR Code
QR Code sanboot:winnt_aoe (generated for current page)