Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sanboot:ubuntu_iscsi2 [2010/10/13 14:26]
qiet72 Better network card detection;pcmcia fixes
sanboot:ubuntu_iscsi2 [2011/01/19 04:26]
tripg
Line 74: Line 74:
  
 # pcmcia/​cardbus networking # pcmcia/​cardbus networking
 +copy_exec /​lib/​udev/​pcmcia-socket-startup
 +copy_exec /​lib/​udev/​pcmcia-check-broken-cis
 +copy_exec /​lib/​udev/​rules.d/​85-pcmcia.rules
 +copy_exec /​etc/​pcmcia/​config.opts
 copy_modules_dir kernel/​drivers/​pcmcia copy_modules_dir kernel/​drivers/​pcmcia
 copy_modules_dir kernel/​drivers/​net/​pcmcia copy_modules_dir kernel/​drivers/​net/​pcmcia
Line 260: Line 264:
       iscsi_pw= ​  The password to login to the target server       iscsi_pw= ​  The password to login to the target server
 </​code>​ </​code>​
 +    * pcmcia support is now complete. ​ All linux supported pcmcia and cardbus network cards should work
     * You cannot create sparse images if you copy to a windows or samba network share, use nfs/ssh/nc (netcat) instead. ​ Here is an example with nc (netcat):     * You cannot create sparse images if you copy to a windows or samba network share, use nfs/ssh/nc (netcat) instead. ​ Here is an example with nc (netcat):
  
Line 273: Line 278:
  
  
- --- //Quinn Plattel 2010/10/13//+ --- //Quinn Plattel 2010/10/14// 
 + 
 +    * This method disables iscsid. I have detected (probably the same) problem with it under Maverick (2.6.35 kernel), but not under Lucid (2.6.32 kernel). iscsid fails to reestablish the iscsi session and fails with response status code 0201. The problem is: I need iscsid to attach more iscsi shares... any idea how to solve that issue? 
 + 
 + --- cinquero 
 + 
 +--- //Trip-G 2011/​1/​19//​ 
 +    * Quinn -  Simply add another iscsistart to the file /​etc/​initramfs-tools/​scripts/​local-top/​iscsi 
 +    * if your second target is on the same server all you need is the iqn 
 +    * like this: 
 +<​code>​ 
 + 
 +MYEXTRANAME="​iqn.numbers.com.whatever:​name:​something.videostorage.mac"​ 
 +        iscsistart \ 
 +        -i `cat /​sys/​firmware/​ibft/​initiator/​initiator-name` \ 
 +        -t ${MYEXTRANAME} \ 
 +        -a `cat /​sys/​firmware/​ibft/​target0/​ip-addr` \ 
 +        -g 1 
 +</​code>​ 
 +   
 +if you have relevant username password stuff you can add that too.  I added this after if [ -e /​sys/​firmware/​ibft/​target0/​target-name ]; then 
 + and before "​else"​ but you should be able to tag it on the end if you want. 
 + 
 +--- Trip-G

QR Code
QR Code sanboot:ubuntu_iscsi2 (generated for current page)