Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
openwrt [2008/10/13 05:31]
zoobab
openwrt [2008/10/13 05:56] (current)
zoobab
Line 1: Line 1:
-Create an appliance running OpenWRT serving gpxelinux.0+====== ​Create an appliance running OpenWRT serving gpxelinux.0 ​======
- +
-Make an HOWTO here with the example of a fonera.+
  
 Edit the file /​etc/​init.d/​dnsmasq to add the right location and arguments: Edit the file /​etc/​init.d/​dnsmasq to add the right location and arguments:
Line 12: Line 10:
   #      args=""​   #      args=""​
     args=" --enable-tftp --tftp-root=/​mnt/​usbdrive --dhcp-boot=/​mnt/​usbdrive/​pxelinux.0"​     args=" --enable-tftp --tftp-root=/​mnt/​usbdrive --dhcp-boot=/​mnt/​usbdrive/​pxelinux.0"​
 +
 +Then type the following commands on the command line:
 +
 +  root@OpenWrt:​~#​ uci set dhcp.dnsmasq.enable_tftp=1
 +  root@OpenWrt:​~#​ uci set dhcp.dnsmasq.tftp_root=/​mnt/​usbdrive
 +  root@OpenWrt:​~#​ uci set dhcp.dnsmasq.dhcp_boot=/​mnt/​usbdrive/​pxelinux.0
 +  root@OpenWrt:​~#​ uci commit dhcp
 +  root@OpenWrt:​~#​ /​etc/​init.d/​dnsmasq restart
 +
 +====== Todo ======
 +
 +  * Rewrite this howto with more precision (step by step)
 +  * Provide a binary version of pxelinux.0
 +  * Mention which version of Kamikaze was used
 +  * Make an ipk package with gpxelinux.0 inside
 +
 +====== Links ======
 +  * [[https://​dev.openwrt.org/​changeset/​12960|Dev.openwrt.org:​ Ucified PXE-Boot options for dnsmasq]]
 +  * [[http://​forum.openwrt.org/​viewtopic.php?​pid=74620|OpenWRT forum: Preparing for PXE boot using dnsmasq]]

QR Code
QR Code openwrt (generated for current page)