This is an old revision of the document!


A PCRE internal error occured. This might be caused by a faulty plugin

====== PXE chainloading ====== If you have a large number of machines which already have a legacy PXE implementation (e.g. network cards containing an Intel PXE ROM), then you may want to avoid having to reflash each machine's network card. You can achieve this by placing gPXE on your TFTP server. The PXE-capable machines will download gPXE via TFTP, and instantly become gPXE-capable machines. {{ :screenshots:gpxe-chaining.png?361x201|PXE chainloading in VMware}} === UNDI Driver === Universal Network Device Interface (UNDI) is an application programming interface (API) for network interface cards (NIC) used by the Preboot Execution Environment (PXE) protocol. When chainloading gPXE from PXE, gPXE can use this API (instead of loading an hardware driver). This way, you're getting support for network controllers that are not natively supported by gPXE. some network controllers have improved performance when using the UNDI driver over the vendor specific gPXE driver (forcedeth for example). To use the UNDI driver, select the UNDI driver (undionly) when generating the gPXE ROM. ===== Setting up PXE chainloading ===== Start by [[download|downloading]] the source tree, then build the PXE-chainloadable gPXE image using cd src make bin/undionly.kpxe Copy //bin/undionly.kpxe// to your TFTP server, and configure your DHCP server to hand out //undionly.kpxe//; if you are using ISC dhcpd then you need to edit ///etc/dhcpd.conf// to contain next-server X.X.X.X; filename "undionly.kpxe"; where X.X.X.X is the IP address of your TFTP server. At this point, you should be able to boot one of your PXE-capable machines, and see it download gPXE from the TFTP server. If everything has worked, then you should see the gPXE startup banner appear: gPXE 0.9.7 -- Open Source Boot Firmware -- http://etherboot.org ===== Breaking the infinite loop ===== When the chainloaded gPXE starts up, it will issue a fresh DHCP request and boot whatever the DHCP server hands out. The DHCP server is currently set up to hand out the gPXE image, which means that you will be stuck in an infinite loop: PXE will load gPXE which will load gPXE which will load gPXE which will load gPXE... You can break this infinite loop by configuring the DHCP server to hand out gPXE only for the first DHCP request; the second DHCP request will return the "real" boot filename. ==== Using ISC dhcpd ==== If you are running ISC dhcpd as your DHCP server, then edit ///etc/dhcpd.conf// to contain if exists user-class and option user-class = "gPXE" { filename "http://my.web.server/real_boot_script.php"; } else { filename "undionly.kpxe"; } This will ensure that the gPXE image (//undionly.kpxe//) is handed out only when the DHCP request comes from a legacy PXE client. Once gPXE has been loaded, the DHCP server will direct it to boot from //%%http://my.web.server/real_boot_script.php%%//. ==== Using dnsmasq ==== Dnsmasq is a DHCP, TFTP, DNS server. Here is the configuration for chain loading gPXE. The conf is: #DHCP part domain=mydomain dhcp-range=192.168.10.100,192.168.10.200,255.255.255.0,30m dhcp-option=option:router,192.168.10.1 dhcp-authoritative # TFTP part enable-tftp tftp-root=/tftproot # host part, a VM that will be booted from network # 00:0C:29 - the MAC part of VMware vendor - we are booting a VM # here we chainload gPXE dhcp-host=00:0c:29:aa:bb:cc,gPXE-client,net:gPXE-testVM,192.168.10.100,10m dhcp-boot=net:gPXE-testVM,undionly.kpxe # for a gPXE enabled client we are asking him to boot from a image located at an URL. The image can be a gPXE script dhcp-userclass=gPXE-booted,"gPXE" dhcp-boot=net:gPXE-booted,http://my.web.server/real_boot_script.php The file undionly.kpxe is located in the /tftproot/ folder. To build undionly.kpxe run: wget http://kernel.org/pub/software/utils/boot/gpxe/gpxe-1.0.1.tar.bz2 tar jxf gpxe-1.0.1.tar.bz2 cd gpxe-1.0.1/src make DEBUG=http,iscsi,tftp,dhcp bin/undionly.kpxe&&sudo cp bin/undionly.kpxe /tftproot/undionly.kpxe ==== Using pxelinux, menu.c32 and dnsmasq to chainload gPXE ==== If you want to test gPXE but you are using extensively pxelinux and you do not want to break the rest of your configuration, you can add a menu entry to load gPXE. The ''/etc/dnsmasq.conf'' should contain something like: #DHCP domain=mydomain dhcp-range=192.168.10.100,192.168.10.200,255.255.255.0,30m dhcp-option=option:router,192.168.10.1 dhcp-authoritative # TFTP part enable-tftp tftp-root=/tftproot # PXE dhcp-boot=/tftproot/pxelinux.0 # required by old versions of gPXE (e.g. the one that comes with OracleVM) dhcp-no-override The ''/tftproot/pxelinux.cfg/default'' should contain: DEFAULT menu.c32 PROMPT 1 LABEL gpxe MENU LABEL gPXE - chainload gPXE from a PXE capable NIC KERNEL undionly.0 On an Ubuntu system install ''syslinux'' package and make ''/tftproot/pxelinux.0'' symlink to ''/usr/lib/syslinux/pxelinux.0''. The file ''/tftproot/undionly.0'' is a symlink to ''/tftproot/undionly.kpxe''. ==== Using the Windows DHCP server ==== If you are using the Windows DHCP server, then you must first define a user class for gPXE. Right-click on your DHCP server and choose "Define User Classes...": {{ :screenshots:winnt_dhcp_define_user_class.png?666x479 |Defining a DHCP User Class in Windows}} Click on //Add...// to add a new user class. Set the display name to "gPXE", the description to "gPXE Clients", and the ID to "gPXE": {{ :screenshots:winnt_dhcp_define_gpxe_user_class.png?369x379 |Defining the gPXE DHCP User Class in Windows}} Right-click on //Server Options// and choose "Configure Options...". On the //Advanced// tab, select "gPXE" from the //User class// drop-down list. Scroll down to option "067 Bootfile Name" and set it to "%%http://my.web.server/real_boot_script.php%%": {{ :screenshots:winnt_dhcp_set_gpxe_filename.png?408x448 |Defining the filename for gPXE clients in Windows}} If everything has worked, then you should see two settings for "067 Bootfile Name" in your DHCP configuration: one containing "undionly.kpxe" and one containing "%%http://my.web.server/real_boot_script.php%%": {{ :screenshots:winnt_dhcp_loop_broken.png?666x242 |Working PXE-chaining DHCP configuration in Windows}} This will ensure that the gPXE image (//undionly.kpxe//) is handed out only when the DHCP request comes from a legacy PXE client. Once gPXE has been loaded, the DHCP server will direct it to boot from //%%http://my.web.server/real_boot_script.php%%//.


Navigation

* [[:start|Home]] * [[:about|About our Project]] * [[:download|Download]] * [[:screenshots|Screenshots]] * Documentation * [[:howtos|HowTo Guides]] * [[:appnotes|Application Notes]] * [[:faq:|FAQs]] * [[:doc|General Doc]] * [[:talks|Videos, Talks, and Papers]] * [[:hardwareissues|Hardware Issues]] * [[:mailinglists|Mailing lists]] * [[http://support.etherboot.org/|Bugtracker]] * [[:contributing|Contributing]] * [[:editing_permission|Wiki Edit Permission]] * [[:wiki:syntax|Wiki Syntax]] * [[:contact|Contact]] * [[:relatedlinks|Related Links]] * [[:commerciallinks|Commercial Links]] * [[:acknowledgements|Acknowledgements]] * [[:logos|Logo Art]]

QR Code
QR Code pxechaining (generated for current page)