Differences

This shows you the differences between two versions of the page.

--- dhcpd [2008/06/05 17:03]
mcb30 created
+++ dhcpd [2009/02/17 17:21] (current)
mcb30
@@ Line 1: / Line 1: @@
 ====== How to configure ISC dhcpd for gPXE ======
-===== Defining the gPXE option space =====
+===== Defining the gPXE-specific options =====
 Add the following block to the top of your ///etc/dhcpd.conf// file:
@@ Line 10: / Line 10: @@
     option gpxe-encap-opts code 175 = encapsulate gpxe;
     option gpxe.priority code 1 = signed integer 8;
-    option gpxe.no-proxydhcp code 176 = unsigned integer 8;
+    option gpxe.keep-san code 8 = unsigned integer 8;
+    option gpxe.no-pxedhcp code 176 = unsigned integer 8;
     option gpxe.bus-id code 177 = string;
     option gpxe.bios-drive code 189 = unsigned integer 8;
     option gpxe.username code 190 = string;
     option gpxe.password code 191 = string;
+    option gpxe.reverse-username code 192 = string;
+    option gpxe.reverse-password code 193 = string;
+    option gpxe.version code 235 = string;
     # Other options that may be useful
     #
     option iscsi-initiator-iqn code 203 = string;
+===== Using the gPXE-specific options =====
+{{ nic.jpeg?237×222|A network card}}
+The gPXE-specific options can be used in the same way as any other DHCP options.  For example:
+    host koala {
+       fixed-address 10.0.0.12;
+       hardware ethernet 00:01:80:34:5e:e4;
+       # Do not wait for a ProxyDHCP reply
+       option gpxe.no-pxedhcp 1;
+    }

Trace: