Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
commandline [2009/04/15 19:53]
warthog9 Fixing dns-server to be just dns
commandline [2010/01/30 06:57]
stefanha
Line 1: Line 1:
 =====Etherboot command-line===== =====Etherboot command-line=====
 ====Network Interfaces==== ====Network Interfaces====
-Etherboot names interfaces following the pattern "​net#"​.+Etherboot names interfaces following the pattern "​net#"​.  The special network interface alias "​netX"​ refers to the last opened network interface.
  
 **ifstat [interfaces...]** Displays information and statistics about the specified interface. ​ If no interface is specified, displays information about all detected interfaces. ​ Information includes MAC address, PCI bus/​slot/​function identiers, and packet counts. **ifstat [interfaces...]** Displays information and statistics about the specified interface. ​ If no interface is specified, displays information about all detected interfaces. ​ Information includes MAC address, PCI bus/​slot/​function identiers, and packet counts.
Line 37: Line 37:
 **chain [image name/URI]** This will fetch, load, then execute either an embedded image or one specified by the URI.  Equivalent to **imgfetch**,​ then **imgload**,​ and then **imgexec**. **chain [image name/URI]** This will fetch, load, then execute either an embedded image or one specified by the URI.  Equivalent to **imgfetch**,​ then **imgload**,​ and then **imgexec**.
  
-**imgfree** ​Remove ​all fetched/loaded ​images.+**imgfree ​[image name]** Free one or all executable/loadable ​images.
  
 **kernel [-n|--name <image name>] <​filename>​ [arguments]** Fetch and load a bzImage format Linux kernel. ​ Equivalent to an **imgfetch** followed by **imgload**. **kernel [-n|--name <image name>] <​filename>​ [arguments]** Fetch and load a bzImage format Linux kernel. ​ Equivalent to an **imgfetch** followed by **imgload**.
Line 73: Line 73:
  
 **root-path** NFS/iSCSI root path.  The path to a network root filesystem. ​ Equivalent to DHCP option 17 (Root Path) **root-path** NFS/iSCSI root path.  The path to a network root filesystem. ​ Equivalent to DHCP option 17 (Root Path)
 +  iSCSI root path syntax: iscsi:<​servername>:​[protocol]:​[port]:​[LUN]:<​targetname>​
  
 **username** Username to be used for any authentication. ​ Currently only used by iSCSI. **username** Username to be used for any authentication. ​ Currently only used by iSCSI.
Line 94: Line 95:
 **next-server** The (TFTP) server from which to obtain files when not specifying an HTTP URL **next-server** The (TFTP) server from which to obtain files when not specifying an HTTP URL
  
-**initiator_iqn_setting** The iSCSI initiator name+**initiator-iqn** The iSCSI initiator name
  
 **<​dhcp_opt_num>:<​format>​** Set a DHCP option by its number (ie. //​209:​string//​ for PXELINUX config file override) **<​dhcp_opt_num>:<​format>​** Set a DHCP option by its number (ie. //​209:​string//​ for PXELINUX config file override)
 +
 +**busid** This yields a five-byte hexadecimal code representing the adapter'​s bus type, followed by the two-byte vendor ID, followed by the two-byte device ID.  This could be handy for fetching an initrd or other RAM disk image containing the OS driver for the particular network adapter. ​ For example:
 +  gPXE> initrd http://​webserver/​initrd-${net0/​busid}
 ==SMBIOS== ==SMBIOS==
 Read-only access to the system'​s Systems Management BIOS.  Identifiers follow the format <​type>​.<​offset>​.<​length>:<​format>​. ​ Example: To read the Manufacturer name, //get smbios/​1.4.0:​string//​ will read SMBIOS offset 4 as a string. ​ Valid formats: string, uristring (for URI-friendly string format), ipv4, int8, int16, int32, uint8, uint16, uint32, hex, uuid Read-only access to the system'​s Systems Management BIOS.  Identifiers follow the format <​type>​.<​offset>​.<​length>:<​format>​. ​ Example: To read the Manufacturer name, //get smbios/​1.4.0:​string//​ will read SMBIOS offset 4 as a string. ​ Valid formats: string, uristring (for URI-friendly string format), ipv4, int8, int16, int32, uint8, uint16, uint32, hex, uuid

QR Code
QR Code commandline (generated for current page)