This is an old revision of the document!

alpha relese — Pär Moberg


Burning EPROMs using willem based programmers.

Shopping List

You will need:

  • PC with a IBM parallel port
  • Willem based programmer
  • Power supply (optional, see below)
  • EPROM, UV or electronic erasable
  • Network card with a ROM socket or ROM-card so you can use/test your new burned EPROM
  • Operating system that can run Windows 32bit programs
  • Programmer software (look on your programmers homepage)



Connect your programmer to your computer and a power supply.

“I would recommend that you use a external power supply, a wall wart, instead of USB when given the choice. My experience is that EPROMs needs more power than USB can provide” — Pär Moberg

An erased EPROM


Windows 9x/Me/NT/2000/XP

Extract/install the programmer software and start programming


Install Wine

“If you are going to use more Windows software than the Willem programmer software, I would recommend to install PlayOnLinux as well” — Pär Moberg

QR Code
QR Code burningroms:willem (generated for current page)