Differences

This shows you the differences between two versions of the page.

--- appnotes:srp_install [2009/11/05 15:48]
mcb30
+++ appnotes:srp_install [2010/04/20 14:10] (current)
jrc3
@@ Line 1: / Line 1: @@
 ====== Installing Windows to an SRP target ======
-You can create customised Windows Server 2008 installation media that will allow you to install Windows directly to your SRP SAN target.  (You cannot do this using the standard installation DVD-ROM; you must customise it first.)
+You can create customised Windows Server 2008 installation media that will allow you to install Windows directly to your SRP((**SCSI RDMA Protocol** (SRP) improves the read performance in terms of throughput which is increased significantly for both random read with good locality and sequential read.\\ **Remote Direct Memory Access** (RDMA) is a direct memory access from the memory of one computer into that of another without involving either one's operating system.)) SAN target.  (You cannot do this using the standard installation DVD-ROM; you must customize it first.)
 ===== Install the Windows AIK =====
@@ Line 8: / Line 8: @@
 ===== Creating an installation medium =====
+==== Making a bootable USB key ====
 Insert the Windows Server 2008 DVD-ROM and a blank USB key.  Start up a command prompt and use //diskpart// to list the disks on your system:
@@ Line 32: / Line 34: @@
     DISKPART> clean
+    DISKPART> uniqueid disk id=12345678
     DISKPART> create partition primary
     DISKPART> select partition 1
@@ Line 38: / Line 41: @@
     DISKPART> assign
     DISKPART> exit
+(where //12345678// can be any non-zero 8-digit hexadecimal string that you choose).
 Copy the contents of the Windows Server 2008 DVD-ROM to the USB key:
@@ Line 44: / Line 49: @@
 (where //D:// is the drive letter of your DVD-ROM drive, and //E:// is the drive letter of your newly-formatted USB key).
+==== Preparing the unattended installation file ====
+Use //Notepad// to create a file containing:
+  <?xml version="1.0" encoding="utf-8"?>
+  <unattend xmlns="urn:schemas-microsoft-com:unattend">
+    <settings pass="windowsPE">
+      <component name="Microsoft-Windows-Setup"
+                 processorArchitecture="amd64"
+                 publicKeyToken="31bf3856ad364e35"
+                 language="neutral"
+                 versionScope="nonSxS"
+                 xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
+        <RunSynchronous>
+          <RunSynchronousCommand wcm:action="add">
+            <Order>1</Order>
+            <Path>cmd.exe /c for /f %i in (&apos;dir /s /b %WINDIR%\inf\oem*.inf&apos;) do drvload %i || echo Ignoring error</Path>
+          </RunSynchronousCommand>
+        </RunSynchronous>
+      </component>
+    </settings>
+    <settings pass="generalize">
+      <component name="Microsoft-Windows-PnpSysprep"
+                 processorArchitecture="amd64"
+                 publicKeyToken="31bf3856ad364e35"
+                 language="neutral"
+                 versionScope="nonSxS">
+        <PersistAllDeviceInstalls>true</PersistAllDeviceInstalls>
+      </component>
+    </settings>
+  </unattend>
+(modifying "amd64" to "x86" if you are using a non-64-bit version of Windows) and save it as //E:\autounattend.xml// (where //E:// is the drive letter of your USB key).
+==== Preparing the imagex configuration file ====
+Use //Notepad// to create a file containing:
+  [ExclusionList]
+  ntfs.log
+  hiberfil.sys
+  pagefile.sys
+  "System Volume Information"
+  RECYCLER
+  Windows\CSC
+  [CompressionExclusionList]
+  *.mp3
+  *.zip
+  *.cab
+  \WINDOWS\inf\*.pnf
+and save it as //E:\wimscript.ini// (where //E:// is the drive letter of your USB key).
+==== Preparing the boot image ====
+Download the correct version of Windows OpenFabrics from [[http://www.openfabrics.org/downloads/WinOF/]] and unzip the //.msi// installer file.  Unpack the driver files to a temporary location:
+    msiexec -a WinOF_2-1_wlh_x64.msi -qb TARGETDIR=%TMP%\WinOF
+Start up a Windows PE Tools Command Prompt (//Start//->//All Programs//->//Microsoft Windows AIK//->//Windows PE Tools Command Prompt//) and mount the boot image file:
+    mkdir %TMP%\Mount
+    imagex /mountrw E:\sources\boot.wim 2 %TMP%\Mount
+(where //E:// is the drive letter of your USB key).  Add the //imagex// command and configuration file to the boot image:
+    copy ..\%PROCESSOR_ARCHITECTURE%\imagex.exe %TMP%\Mount
+    copy E:\wimscript.ini %TMP%\Mount
+Add the WinOF drivers to the boot image:
+    cd %TMP%\WinOF\PFiles\WinOF\Drivers
+    for /f %i in ('dir *.inf /s /b') do peimg /inf=%i %TMP%\Mount
+Commit the changes to the boot image:
+    imagex /unmount /commit %TMP%\Mount
+==== Preparing sanbootconf ====
+Download //sanbootconf// from [[http://git.etherboot.org/releases/sanbootconf/sanbootconf-latest.zip]] and save it as //E:\sanbootconf.zip// (where //E:// is the drive letter of your USB key).
+===== Creating the installation image =====
+==== Enabling SRP boot support ====
+Boot from your USB key, and install Windows Server 2008 to a blank physical disk on a new machine.  (This step is sadly necessary due to limitations in the Windows Setup infrastructure.)
+In the newly-installed Windows Server 2008, install //sanbootconf// from your USB key.
+Start up a command prompt and prepare the machine for capturing the installation image:
+    cd %WINDIR%\System32\sysprep
+    sysprep /oobe /generalize /shutdown /unattend:E:\autounattend.xml
+(where //E:// is the drive letter of your USB key, which may have changed from earlier).
+==== Capturing the installation image ====
+Boot from your USB key.  At the language selection screen, press //Shift-F10// to start up a command prompt window and capture the image:
+    cd \
+    imagex /append C: E:\sources\install.wim "Windows Server 2008 (SRP boot)" "Windows Server 2008 with SRP boot support" /flags "SERVERENTERPRISE"
+(where //SERVERENTERPRISE// may need to be changed to //SERVERSTANDARD// or //SERVERDATACENTER// depending on which version of Windows Server 2008 you are installing).
+Quit the Windows installer and shut down the machine.
+==== Converting back to a DVD-ROM (optional) ====
+You may want to convert your bootable USB key back to a DVD-ROM.  To do this, start up a Windows PE Tools Command Prompt (//Start//->//All Programs//->//Microsoft Windows AIK//->//Windows PE Tools Command Prompt//) and generate an ISO image file:
+    oscdimg -m -n -o -bE:\boot\etfsboot.com E:\ C:\win2k8.iso
+(where //E:// is the drive letter of your USB key, and //C:\win2k8.iso// is the place that you want to store the ISO image file).
+You can burn this ISO image file to a blank DVD-ROM, or continue to use the USB key.  Either will work for installing Windows Server 2008.
+===== Installing to the SRP target =====

Trace:

Differences

Navigation

Search

Toolbox

QR Code