The “IDE Flasher” in German only
. The “IDE Flasher” is an extremely simple flash programmer connected to any IDE bus (exclusively, can't be connected in parallel to harddisk or CDROM). Using this simple trick, it is compatible with any computer that has an IDE interface, no matter what bus system is used. This circuit uses exactly two chips, two resistors and two capacitors, nothing more. Like the “c't-Flasher”, closed-source DOS-based software is used to write the EEPROM. The printed circuit board is available raw with resistors and capacitors soldered on, as kit, and as complete, tested device for 17 EURO to about 50 EURO.