[gPXE] (no subject)

[Andrew Bobulsky]

Hello Bin,

Your root path setting in your dhcp server needs to have the same boot
string that you're passing through manually with the sanboot command.  Right
now it appears that all you have configured is the iqn of the target.

Put the "iscsi:(ipaddress)::::" in front of the iqn on your root path
setting and it should work correctly.

Regards,
Andrew Bobulsky

On Sep 28, 2010, at 12:12 PM, Bin <z2333 at hotmail.com> wrote:

I am testing gpxe with VM workstation, MS DHCP and windows 7. Here is one
issue I can’t find any clue.



I am using the UNDI driver method, gpxe is loaded ok. The issue is trying to
boot from SAN.



It is always saying not support (0x3c03e003). If I press CTRL_B and using
the console to manually enter sanboot iscsi:192.168.1.204::::iqn… then it
will boot from the iscsi target.







I double checked the DHCP settings and the iqn is correct. I also tried with
starwind and different server. No luck. The same issue is when trying on a
physical machine. No luck.



Anyone can help?



Thanks,


<gpxe_error.JPG>

_______________________________________________
gPXE mailing list
gPXE at etherboot.org
http://etherboot.org/mailman/listinfo/gpxe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://etherboot.org/pipermail/gpxe/attachments/20100928/e21a6e9f/attachment.html