[gPXE] How to modify the code can not get DHCP information on the 2nd

[sqwbwh]

How to modify the code can not get DHCP information on the 2nd?(GPXE only used to boot the system from ISCSI)
Is to remove this step.
net0: 00:0 c:: 29:08:11:35 on UNDI-PCI02: 01.0 (OPEN)
  [Link: up, TX: 0 TXE: 0 TX: 0 rxe: 0]
DHCP (net0 00:0 c: 29:08:11: d5 ).... ok
net0: 192.168.0.202/255.255.255.0


This can speed up boot speed.
Normal GPXE run to start from the boot system tftp process takes about 8 seconds or so
If removed from the second time for DHCP information will only need a very quick 2.5 seconds.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://etherboot.org/pipermail/gpxe/attachments/20101105/9d2a0477/attachment.html