[gPXE] Porting Windows XP to New Target Hardware + ISCSI Boot

[Marc Hammer]

Hi Shao,

are you know a way of installing device drivers for not connected
"phantom" devices with a commandline tool eg. devcon .
I allready try the usual comandline switches, but it seems to me that I
can only install drivers for connected devices with devcon.
If not I have to stay with my AutoIT script for the Device Manager.

Thanks

Marc

Miller, Shao schrieb:
> Good day Marc,
>
> Excellent news; I'm glad you found the installation that is crashing
> you.  So:
>
> At this point, I assume that you've been able to properly shut down the
> client after the SAN-boot successfully.  If so, then the PCI-to-PCI
> bridge is sitting there in the Registry, waiting to be installed.  If
> you boot this SAN image in a virtual machine as the "real" hard disk
> drive, or boot the SAN image on the original computer it came from, you
> can then go into Device Manager and install the device.  After that, it
> will be already-installed for the target system.  You'll need to follow
> the instructions on the wiki guide you've already referenced[1] to show
> the "phantom" device.
>
> - Shao Miller
>
> [1] http://www.etherboot.org/wiki/appnotes/port_winnt_sanboot
>
>