[gPXE] Fw: Fw: Booting MS-DOS using gPXE/iSCSI: C: drive is read only

[ACS]

 "Michael Brown" wrote
> I have tried to reproduce your problem, but I am finding that writing to 
> disk
> works even after typing "verify on".  Could you send a copy of your whole
> config.sys and autoexec.bat files?

Over here, disc write can be toggled from cmdline by verify off/on
Find below my current dos6.22 config files, both are relics from the past

NB: no CD attached, videcdd driver says it doesn't load
NB: Using DOS part of w98b  showed same problem using same 
autoexec/congis.sys

Adrian Bacon




FILES=50
DEVICE=C:\dos\HIMEM.SYS
DOS=HIGH,UMB
rem gpxe DEVICE=C:\dos\EMM386.EXE NOEMS X=c800-cbff
rem DEVICEHIGH=C:\command\SETVER.EXE
rem DEVICEHIGH=C:\COMMAND\ansi.sys
rem DEVICEHIGH=c:\utils\gmouse.sys 2
DEVICEhigh=C:\dos\videcdd.SYS /D:IDECD000
lastdrive=z
DEVICEhigh=C:\SB16\CTSB16.SYS /UNIT=0 /BLASTER=A:220 I:5 D:1 H:5
DEVICEhigh=C:\SB16\CTMMSYS.SYS





@ ECHO OFF
SET SOUND=C:\SB16
SET BLASTER=A220 I5 D1 H5 P330 T6
SET MIDI=SYNTH:1 MAP:E
rem C:\UTILS\VGA\CLMODE m3
rem C:\SB16\DIAGNOSE /S /W=C:\WINDOWS
C:\SB16\MIXERSET /P /Q
SET PATH=C:\Dos;C:\UTILS;C:\UTILS\PACK;C:\UTILS\NC;C:\BORLANDC\BIN
SET TEMP=C:\TEMP
prompt $p$g
rem gPXE can't write with verify on:   =>  verify on
rem      loadhigh c:\utils\mware630\mouse.com
lh C:\DOS\mscdex.exe /d:idecd000 /l:e
cd c:\games
c:\utils\mmouse\mmouse
nc