[gPXE] gpxe-1.0.1 pcnet32 problem
Thomas Miletich
thomas.miletich at gmail.com
Wed Jul 28 06:57:03 EDT 2010
Hello
It sounds like there's something going wrong in pcnet32_probe().
Please build a gPXE image with debugging for the pcnet32 driver and
serial console support enabled.
To enable the serial console, edit 'src/config/console.h' and remove
the '//' in front of '//#define CONSOLE_SERIAL', thus making the line
'#define CONSOLE_SERIAL'.
Then build gPXE with the following line:
make bin/pcnet32.dsk DEBUG=pcnet32
(adjust 'bin/pcnet32.dsk' according to your needs).
In virtualbox you can configure a serial port that redirects the
output to a file. Please let us know the contents of said file. This
should give us an idea where the driver gets stuck.
--
Thanks for reporting
Thomas
On Wed, Jul 28, 2010 at 12:22 PM, Gilles Martin <gilles.martin at psi.ch> wrote:
> Hi,
>
> Now that I have recover my gpxe script thanks to Josh, I can test the
> latest version of GPXE...
>
> My test environment is like that:
>
> * Virtualbox 3.2.6 with ethernet adapter PCNET-Fast III (Am79C973)
> * First PXE boot to a classical PXE server
> * Then load a GPXE lkrn image made at the Rom-o-matic website.
>
> This is working well with GPXE-1.0.0 with all drivers or only PCNET32
> driver.
>
> This is not working with GPXE-1.0.1:
>
> With all drivers it get stuck just after "GPXE initializing devices..."
> With only PCNET32, it doesn't detect the interface with "ifopen net0".
>
>
> Thanks for your help.
>
> Gilles
>
> _______________________________________________
> gPXE mailing list
> gPXE at etherboot.org
> http://etherboot.org/mailman/listinfo/gpxe
>
More information about the gPXE
mailing list