[gPXE] install win2008 to san

Aclhk Aclhk aclhkaclhk at ymail.com
Tue Feb 9 05:04:11 EST 2010


i fixed it as i defined the gateway.

--- 2010年2月9日 星期二,Aclhk Aclhk <aclhkaclhk at ymail.com> 寫道﹕

寄件人: Aclhk Aclhk <aclhkaclhk at ymail.com>
主題: [gPXE] install win2008 to san
收件人: gpxe at etherboot.org
日期: 2010年2月9日,星期二,上午8:48

I tried to install win2008 using winpe 2.1 or 3.0 without luck.

I followed the below procedure:
http://etherboot.org/wiki/sanboot/win2k8_iscsi_install

dhcp net0
set keep-san 1
sanboot iscsi:192.168.1.11::::iqn.2007-08.name.dns.target.my:iscsiboot
chain tftp://192.168.1.11/boot/pxeboot.n12

after sanboot, it said something like "bios has registered .... preserving connection, boot failed...."
after winpe was loaded, I ran the following commands:
net use f: \\192.168.1.111\win2008
f:\setup.exe

the win2008R2 (32bit) installation could not recognise any iscsi harddisk (the PC has no HDD).

Is there any method to check the existance of iscsi disk in winpe?



      



      Yahoo!香港提供網上安全攻略,教你如何防範黑客!了解更多
-----內含下列附件-----

_______________________________________________
gPXE mailing list
gPXE at etherboot.org
http://etherboot.org/mailman/listinfo/gpxe



      Yahoo!香港提供網上安全攻略,教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://etherboot.org/pipermail/gpxe/attachments/20100209/bb0893ca/attachment.html 


More information about the gPXE mailing list