[gPXE] Is multipath supported in gPXE iSCSI boot inWindows?

[Sonny Li]

Have done some search, but don't get the suitable results. So ask here:

Situation:
iSCSI initiator machine has two NICs with separated IP address,  Init_ipA and init_ipB
iSCSI Target machine also has two NICs with separated IP address,  target_ipA and target_ipB

question:
Is it possible to set the following and how to setup them
Init_ipA gpxe iSCSI connect to target_ipA for iSCSI boot   as primary path
Init_ipA gpxe iSCSI connect to target_ipA for iSCSI boot  as secondary path

So if primary path is down, secondary path can take it over to continue for iSCSI boot. I have tried for Hardware NICs (like Intel PCI-E). they can support above situation, but not sure for gPXE iSCSI boot.

Thanks

Sonny

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://etherboot.org/pipermail/gpxe/attachments/20100428/4a51576f/attachment.html