[gPXE] Issue 55

[Patrick Cervicek]

On Thu, 19 Nov 2009, Thomas Miletich wrote:

> Hi
> Even if the UNDI driver works some times, in your setup it isn't
> really supposed to work, and I'm surprised that it does.

What should cause a problem in my setup? Booting from a usb stick?

btw: Why does "ifstat" show two different nic?
PCI00:19.0
UNDI-PCI00:19.0

Does this mean, using DEBUG changes the behavior of gPXE?

> Please try a gPXE build with DEBUG=e1000. It's definitely helpful if
> you can use the serial console because there will be a lot of output.
> Please try 'dhcp net0' with the debugging options enabled and capture
> all the output on the serial port. Wait until the output stops, or at
> least slows down(that means dhcp is finished). Then please put your
> capture at http://etherboot.pastebin.com/ or attach it as a file to a
> mail
>

I tried DEBUG=e1000 and get much output but still does not work. 
Unfortunately this notebook has no serial console. I will try to get a USB2SERIAL-Adapter and try to get
the Debugging output tomorrow, before the owner takes back his notebook 
next week.

Patrick