✎ usbwithstorage - Etherboot/gPXE Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Deploying to a USB device while keeping storage capabilities ======
As stated [[removable | here]] you can place gPXE on a USB drive, unfortunately, the standard procedure will render your USB device unusable for any other purpose. The intention of this guide is to walk you through the process of deploying gPXE to a USB device and be able to still use it as storage media.

**Note:** ''This guide is a walkthroug for Mac OS X 10.5, also it uses BKO instead of gPXE, still I believe the process would be similar in Linux and for gPXE.''

**__Important:__** Backup the data on your USB drive, as you **WILL** lose it in this process.

==== 1. Downloading ====
[[http://boot.kernel.org|Download]] BKO's image for USB

{{:screenshots:download.png?500|}}

==== 2. Preparing the USB device ====
Getting the device ready for deployment is not trivial in Leopard, as the OS mounts it to the desktop and the context menu removes it from the system. These few steps will prepare the USB device for deployment:

  - Launch Disk Utility
  - Select the partition(s) in the device and click the "unmount" button from the toolbar
    *{{:screenshots:umount.png?500|}}
  - Now the device is ready, but firs you need to identify your device. Select the USB device from the left menu and click the "info" button from the toolbar.
    * The name besides "Disk Identifier" is the one you'll need to locate your device under the ''/dev'' directory
    *{{:screenshots:disk_id.png?500|}}
    *In the case depicted above the Disk Identifier is disk1, so the device would be ''/dev/disk1'', that's the device name we'll use for the rest of the tutorial, adapt to whatever your disk identifier is.
==== 3. Deploying BKO ====
To deploy BKO to your USB drive, fire up Terminal and cd to the directory  you downloaded it and deploy it by using
    dd if=gpxe.usb of=dev/disk1
Remember to substitute ''disk1'' for your own disk identifier.

If you're deploying a generic gPXE, just follow the instructions under [[removable|Using removable media]]

==== 4. Recovering your storage space ====
At the moment, your BKO/gPXE should be up and ready, feel free to try it out. Nevertheless you will find that you're using your whole USB drive for a tool that uses barely 2MB of space. We will be redefining the partition table so we can use the remaining espace.

There is a screenshot of this process below.

  - Launch the fdisk utility by using
    * <code>fdisk -e /dev/disk1</code>
  - Once fdisk starts, the prompt should look like
    * <code>fdisk: 1></code>
  - Issue the print command to get a preview of the partition table
    * <code>fdisk: 1> print</code>
    * BKO is installed on the forth partition, note the size of the partition, for you will need that number afterwards.
  - Edit the first partition to use it as the storage partition.
    * <code>fdisk: 1> edit 1</code>
    - First you will be asked for the partition's id, enter ''0B'' that is the code for Win95 FAT-32 filesystem.
    - Then you will be asked if you want to edit in CHS (cylinder, head, sector) mode, say ''no'' unless you know what you're doing
    - When prompted for the partition offset, enter the size of BKO's partition, in this case ''4064''
    - Last you will be asked for the partition's size, leave the default value.
  - Issue the print command again to make sure the changes have been made
    * <code>fdisk: 1> edit 1</code>
  - Write the changes to the disk by issuing the write command.
    * <code>fdisk: 1> write</code>
  - Exit fdisk
    * <code>fdisk: 1> quit</code>
{{:screenshots:fdisk.png?500|}}

==== 5. Give format to your new partition ====
Now you will have your BKO/gPXE working and a separate partition for your storage, but Leopard still won't recognize the new partition, you need to give format to it.
  - Launch Disk Utility.
  - Select disk1s1 under the USB device on the left menu.
  - Navigate to the "erase" tab.
  - Select MS-DOS (FAT) as the partition's format, set the partition's name and click the "erase..." button.
{{:screenshots:format.png?500|}}

You're all set! now your BKO/gPXE is working and you can still use your USB device as a storage media.

 --- //[[Jorge.Rodriguez@students.ittralee.ie|Jorge Rodriguez García (A.K.A. Tiriel) ]] 2009/09/24 16:57//
Trace: • autobootchainurl • howtos • winnt_iscsi • tg3 • 2009 • ubuntu_iscsi
Navigation

Search

Toolbox

QR Code
