✎ soc:2009:dverkamp:notes:windows_xp_iscsi

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=== Windows iSCSI forward authentication ===

== Test ==

Boot into a Windows XP operating system stored on an iSCSI target.

== DUT configuration ==

No physical disks present.  System configured to boot from NIC equipped with gPXE ROM.

== Environment configuration ==

iSCSI target running IETD set up to require forward CHAP authentication.  DHCP server providing network configuration and iSCSI root-path.

== Result ==

Success is defined as reaching the Windows graphical login screen.

=== Detailed test procedure ===

== Prerequisites ==

  * Image of installation CD (in this test, XP Professional SP 2): ''dd if=/dev/cdrom of=winxp.iso''
  * QEMU
  * iscsitarget

== Windows Setup ==

Create hard disk image: ''qemu-img create -f raw hd.img 4G''

Boot setup CD in QEMU: ''qemu -hda hd.img -cdrom winxp.iso -boot d''

Install as usual.  Format as NTFS (quick) to save time, using the entire disk.

After the first reboot, allow booting from hard disk (do not press a key at the "Boot from CD" prompt).

First try at the graphical stage of setup got stuck at "Installing Devices" for at least an hour. TODO: investigate if this is due to kqemu or other environmental factors, or restart QEMU between setup stages.  Restarting QEMU allows it to continue...

Enter a name ("Test" for this example), then enter the product key.

Accept the default computer name and blank administrator password.

Accept the default time configuration.

Accept the default network configuration and workgroup.

After this stage of setup completes and another reboot, setup is complete.

Click OK on the Display Settings dialog to adjust the screen resolution, then click OK to accept the change.

After some time, the first-run wizard appears; press Next.

Select "Not now" on the Windows Update page, then click Next.

Click "Skip" on the network configuration page.

Select "No" on the activation page and click Next.

Enter "Test" as the first username and click Next.

Click Finish.

At this point, you should be at the Windows desktop.

TODO: Network adapter did not acquire an address from QEMU's DHCP server; reboot allowed it to work.

== iSCSI initiator setup ==

Download the Microsoft iSCSI [[http://download.microsoft.com/download/C/0/3/C0326CE2-51D0-4E1C-A9E0-7E16BE79410B/CHK-Boot/Initiator-2.08-boot-build3825-x86chk.exe|initiator]] in the VM, then run the installer.

Select "Initiator Service" and "Software Initiator" only, then click Next.

Select "I agree", then click Next.

Click Finish when the installation is complete.

Download http://git.etherboot.org/releases/sanbootconf/sanbootconf-latest.zip and extract it, then run install.bat.

Now setup is complete; shut down the Windows machine.

== iSCSI target setup ==

On the iSCSI target machine, edit ''/etc/ietd.conf'' to add a target.

  Target iqn.2000-01.test.etherboot.org:iscsiboot.xp
          Lun 0 Path=/path/to/hd.img
          IncomingUser testuser userpassword
          OutgoingUser testtarget targetpassword

Ensure the iSCSI target is running. (ex. Gentoo: ''/etc/init.d/ietd start'')

== Booting with gPXE ==

TODO: authentication

Create a gPXE script as follows and boot it:

  #!gpxe
  sanboot iscsi:my.target.dns.name::::iqn.2000-01.test.etherboot.org:iscsiboot.xp

(where my.target.dns.name is the DNS name or IP of the machine running the iSCSI target)

Windows should boot to the desktop.

{{:soc:2009:dverkamp:notes:winxp-iscsi-rh.png|}}

Trace: • revised_timeline • debian_lenny_iscsi • week11 • week1 • yazzy • week3 • week7 • week9 • dopehouse • week5 • week12 • gentoo_iscsi • win2k8_iscsi_direct • week10 • week4 • bkodebianiscsi • week1 • autobootchainurl • week5 • dhcp_-_build_instructions