✎ sanboot:win2k3 - Etherboot/gPXE Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Windows Server 2003 boot from SAN ======

Windows Server 2003 supports booting from either an iSCSI or AoE SAN.  You cannot install directly to the SAN target; you must first install Windows Server 2003 to a physical disk.

===== Installation =====

Start by installing Windows Server 2003 to a physical disk.  It is best to use an external USB, FireWire, or eSATA disk; this will make later stages easier.

When installing, use a small partition (around 4GB) rather than the whole disk.  At the partitioning screen:

{{screenshots:win2k3_setup.png?360x198|Windows Server 2003 setup}}

press **C** to create a partition and enter **4096** as the size (in MB).  You should then see a screen that looks like:

{{screenshots:win2k3_setup_partitioned.png?360x198|Windows Server 2003 after partitioning}}

You can now press Enter to install Windows Server 2003 to this partition.  The rest of the installation will proceed as normal.

===== Preparation for SAN boot =====

Now you must select whether you will use iSCSI or AoE as your SAN technology:

  * [[sanboot:winnt_iscsi|Add iSCSI boot support to Windows Server 2003]]

  * [[sanboot:winnt_aoe|Add AoE boot support to Windows Server 2003]]

Trace: • windows_xp_iscsi • scratch • gdbstub • winpe • derekpryor • aoebootprepdebianetch • packages • benchmark • soc • romdumping • notes • project_plan • notes • vmwarebios • openwrt • usermode_howto • pxechaining • gpxeonvmware • 2009 • sanboot