Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sanboot:debian_lenny_iscsi [2009/11/22 05:15]
garlopf
sanboot:debian_lenny_iscsi [2009/11/23 17:33] (current)
garlopf
Line 39: Line 39:
 While this simple distinction might seem innocent enough, it really isn't. In many cases it is impracticalt to create a new initrd or root image to change the iscsi parameters. Luckily, for most people there is a more elegant way to get the parameters. The latest lenny kernel (as of 4. November 2009) has an [[iBFT]] function compiled in that makes fetching the iSCSI parameters from [[iBFT]] really easy. From your initrd script, simply traverse the directory ''/​sys/​firmware/​ibft''​ The files in there contain all the ibft information you could ever want. While this simple distinction might seem innocent enough, it really isn't. In many cases it is impracticalt to create a new initrd or root image to change the iscsi parameters. Luckily, for most people there is a more elegant way to get the parameters. The latest lenny kernel (as of 4. November 2009) has an [[iBFT]] function compiled in that makes fetching the iSCSI parameters from [[iBFT]] really easy. From your initrd script, simply traverse the directory ''/​sys/​firmware/​ibft''​ The files in there contain all the ibft information you could ever want.
  
-<code bash> +**FIXME I didn't follow this route, but if you do, please put the initramfs ​script ​you created here. You can get access to this wiki by asking in the #etherboot IRC channel at irc.freenode.org. Se below for the route I took, and consequently the script i made instead** 
-TODO: post an initrd hook/script that does exactly that + 
-</code>+**UPDATE I found a patch that probably solves this!** 
 +This patch might help: http://​bugs.debian.org/​cgi-bin/bugreport.cgi?​bug=514924#​4
  
 ==== Extras: XEN + iSCSI + Lenny + iBFT ==== ==== Extras: XEN + iSCSI + Lenny + iBFT ====
  
-I decided to share my experience with iSCSI + [[http://​xen.org/​|Xen]] on Debian Lenny because that is a very important part of my setup. If you don't know or don't care about Xen you can simply skip this section. In short, I want to configure all my webserver farm nodes to boot xen dom0 kernels over iSCSI for my little [[http://​colobg.net/​|webhost company]]. The problem arises since the xen kernels prior to 2.6.32 does not populate ''/​sys/​firmware/​ibft ​directory''​.+I decided to share my experience with iSCSI + [[http://​xen.org/​|Xen]] on Debian Lenny because that is a very important part of my setup. If you don't know or don't care about Xen you can simply skip this section. In short, I want to configure all my webserver farm nodes to boot xen dom0 kernels over iSCSI for my little [[http://​colobg.net/​|webhost company]]. The problem arises since the xen kernels prior to 2.6.32 does not populate ''/​sys/​firmware/​ibft'' ​directory.
  
 ==== Solutions to XEN + iSCSI + Lenny + iBFT ==== ==== Solutions to XEN + iSCSI + Lenny + iBFT ====
 There are 3 solutions to the problem of aquiering iSCSI data from the iBFT with a lenny XEN kernel in initrd: There are 3 solutions to the problem of aquiering iSCSI data from the iBFT with a lenny XEN kernel in initrd:
-  * Patch the kernel or use an alternate kernel to fix the iBFT + XEN problem. This patch looks promising: http://​patchwork.kernel.org/​patch/​50838/​ . Documentation for how to proceed with that is available here: http://​wiki.debian.org/​DebianKernelCustomCompilation and you might also want to read this: http://​packages.debian.org/​lenny/​kernel-package and this: http://​www.debian.org/​doc/​FAQ/​ch-kernel.en.html 
-  * Use an utility that gets hold of the iBFT data without depending on the kernel sysfs directory ''/​sys/​firmware/​ibft''​. One way that has been tested and that works is to do that is to fetch an older version of the Open-iSCSI sourcecode from here: http://​www.open-iscsi.org/​bits/​ and compiling the old fwparam_ibft tool that is mentioned in the etch howto. This tool gets its iBFT data directly from memory without asking the kernel at all. This has been confirmed to work with an XEN dom-0 kernel. 
   * Fall back to the default behaviour in Lenny, namely to read the settings from configurations in ''/​etc/''​ and/or settings passed as kernel parameters.   * Fall back to the default behaviour in Lenny, namely to read the settings from configurations in ''/​etc/''​ and/or settings passed as kernel parameters.
 +  * Patch the kernel or use an alternate kernle (newer than 2.6.32 or patched) to fix the iBFT + XEN problem. This patch looks promising: http://​patchwork.kernel.org/​patch/​50838/​ . Documentation for how to proceed with that is available here: http://​wiki.debian.org/​DebianKernelCustomCompilation and you might also want to read this: http://​packages.debian.org/​lenny/​kernel-package and this: http://​www.debian.org/​doc/​FAQ/​ch-kernel.en.html
 +  * My favourite: Use an utility that gets hold of the iBFT data without depending on the kernel sysfs directory ''/​sys/​firmware/​ibft''​. I did this by fetching an older version of the Open-iSCSI sourcecode from here: http://​www.open-iscsi.org/​bits/​. I have confirmed that the version mentioned in the Etch howto works flawlessly: http://​www.open-iscsi.org/​bits/​open-iscsi-2.0-865.13.tar.gz. I used the Etch howto  as a reference when building. You only need to compile the tool called ''​fwparam_ibft''​ as the rest is allready installed in Lenny. This tool gets its iBFT data directly from memory without asking the kernel at all. After compiling the ''​fwparam_ibft''​ tool and copying it to ''/​usr/​sbin'',​ make sure to creating these two initramfs hook script which will be executed automatically to include the fwparam_ibft binary in the ramdisk image when initramfs is updated, and to put it to good use at boot time respectively.
 +=== /​etc/​initramfs-tools/​hooks/​iscsi_tcp ===
 +<code bash>
 +#!/bin/sh
 +set  -e
 +PREREQ=""​
 +prereqs()
 +{
 +        echo "​$PREREQ"​
 +}
 +case $1 in
 +prereqs)
 +        prereqs
 +        exit 0
 +        ;;
 +esac
 +. /​usr/​share/​initramfs-tools/​hook-functions
 +# NOTE THIS WILL BE INCLUDED BY DEFAULT, SO ITS DISABLED HERE: [ -x /​usr/​sbin/​iscsistart ] && copy_exec /​usr/​sbin/​iscsistart /sbin
 +[ -x /​usr/​sbin/​fwparam_ibft ] && copy_exec /​usr/​sbin/​fwparam_ibft /sbin
 +[ -x /sbin/ip ] && copy_exec /sbin/ip /sbin
 +manual_add_modules iscsi_tcp
 +manual_add_modules ib_iser
 +</​code>​
 +=== /​etc/​initramfs-tools/​scripts/​local-top/​iscsi_tcp ===
 +This script will run at the correct time during boot to bring up iSCSI. It has been verified to work in a XEN-Dom0 node.
 +<code bash>
 +#!/bin/sh
 +set -e
 +PREREQ="​udev"​
 +prereqs()
 +{
 +        echo "​$PREREQ"​
 +}
 +case $1 in
 +prereqs)
 +        prereqs
 +        exit 0
 +        ;;
 +esac
 +
 +echo ""​
 +echo "​Custom iSCSI Boot script for Debian Lenny starting..."​
 +echo ""​
 +
 +modprobe -q iscsi_tcp
 +modprobe -q ib_iser
 +
 +echo "​Evaluating IBFT parameters"​
 +for i in $(fwparam_ibft);​
 +do
 + #Strip of namespace
 + V=$(echo $i | sed '​s|network\([0-9]*\):​|iSCSI_INITIATOR_\1_|'​ | sed '​s|target\([0-9]*\):​|iSCSI_TARGET_\1_|'​ | sed '​s|iscsi-initiator\([0-9]*\):​|iSCSI_INITIATOR_\1_|'​)
 + echo " ​  ​Exporting $V"
 + export $V;
 +done
 +
 +echo "​Bringing up the interface used to boot"
 +for i in $(ls /​sys/​class/​net);​ do
 +       ​IFADDR=$(cat /​sys/​class/​net/​$i/​address)
 +       if [ $IFADDR = $iSCSI_INITIATOR_0_HWADDR ]; then
 +               echo " ​  Using $i with MAC $IFADDR"​
 +               ​export iSCSI_INITIATOR_0_IF=$i
 +       fi
 +done
 +
 +echo " ​  ​Bringing up $iSCSI_INITIATOR_0_IF for iSCSI..."​
 +ip link set $iSCSI_INITIATOR_0_IF up
 +
 +echo " ​  ​Setting up networking on $iSCSI_INITIATOR_0_IF..."​
 +ip addr add $iSCSI_INITIATOR_0_IPADDR/​$iSCSI_INITIATOR_0_MASK brd + dev $iSCSI_INITIATOR_0_IF
 +ip route add default via $iSCSI_INITIATOR_0_GATEWAY
 +
 +echo "​Connecting to iSCSI target $iSCSI_TARGET_0_NAME on $iSCSI_TARGET_0_IPADDR..."​
 +iscsistart -i $iSCSI_INITIATOR_0_NAME -t $iSCSI_TARGET_0_NAME -g 1 -a $iSCSI_TARGET_0_IPADDR
 +sleep 5
 +
 +</​code>​
 +**Important:​ remember to ''​chmod +x''​ both these scripts so that the are executable before updating your initrd**
 +
 +==== Conclusion ====
 +
 +Configuring boot over iSCSI work in Debian Lenny can potentially be much easier than it was in Etch because of the built-in support for iSCSI boot made by Debian devs in Lenny. If you only have a few servers that you need to boot over iSCSI then using this metod is simple to set up and probably works great.
 +
 +However if you have a setup with many computers (cluster) or need a more elegant way to manage your boot parameters for another reason then you will need to modify the default behaviour in Lenny, and this requires about half the amount of fiddeling required with Debian Etch.
 +
 +However if you decide to boot XEN nodes like I showed in this example you need to fiddle just as much if not more than the Etch howto described :)
  

QR Code
QR Code sanboot:debian_lenny_iscsi (generated for current page)