✎ sanboot:debian_etch_iscsi - Etherboot/gPXE Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======  Debian etch  ======







===== Preparing an existing installation for iSCSI =====

This howto is based on the following assumptions:
   * a base debian >= etch with all the security updates
   * the system is installed on a single partition "/" on /dev/sda1
   * there is an already done iscsi target on an iscsi server
   * there is a working dhcp server

==== Compile iscsistart and fwparam_ibft ====

Since two fundamental tools from open-iscsi are not included in the debian package, they have to be compiled from the sources with the following steps (i have used a different machine for all the compilation stuff).

Install the appropriate devel packages:

   apt-get build-dep open-iscsi
   apt-get install libdb4.3-dev

Download the sources and compile them:

   wget http://www.open-iscsi.org/bits/open-iscsi-2.0-865.13.tar.gz (this is the latest tarball at this time)
   tar xzf open-iscsi-2.0-865.13.tar.gz
   cd open-iscsi-2.0-865.13
   make -C usr
   make -C utils/fwparam_ibft

The two files needed are ''usr/iscsistart'' and ''utils/fwparam_ibft/fwparam_ibft'' so they have to be copied in ''/usr/sbin''.

==== Install the needed packages ====

   apt-get install iproute

==== Create the initramfs scripts ====

Create two scripts shown below. These scripts have to be executable.
   * ''/etc/initramfs-tools/hooks/iscsi_tcp'' will copy the ''iscsi_tcp'', ''iscsi_iser'' kernel modules followed by their dependancies, ''/usr/sbin/iscsistart'' and ''/usr/sbin/fwparam_ibft'' to the initial ramdisk.
   * ''/etc/initramfs-tools/scripts/local-top/iscsi_tcp'' is copied to the ram disk and run at boot-time, just before the root filesystem is mounted. If the root device string looks like a SCSI device it brings up the appropriate Ethernet device, sets up the ip address passed through dhcp and connects the root file system on the iSCSI target.

After you have made sure that ''/etc/initramfs-tools/initramfs.conf''
contains the line
   BUSYBOX=y
you can update the initial ramdisk:
   dpkg-reconfigure linux-image-$(uname -r)

If the modifications were applied to a physical disk on the client
machine, you can now [[sanboot:transfer|transfer the contents of your
physical disk to the SAN target]].

If the image you wish to export to client systems was modified directly,,
you can now [[sanboot:iscsitarget|make the contents of that image available
via iSCSI]].

==== Hint ====
   * If the system hangs before the root device has been mounted, passing ''break=mount'' on the command line will spawn a shell before ''scripts/local-top/iscsi_tcp'' is run. This should allow for further debugging.

==== Scripts ====
=== /etc/initramfs-tools/hooks/iscsi_tcp ===
<code bash>
#!/bin/sh
 
set  -e
 
PREREQ=""
 
prereqs()
{
        echo "$PREREQ"
}
 
case $1 in
prereqs)
        prereqs
        exit 0
        ;;
esac
 
. /usr/share/initramfs-tools/hook-functions

[ -x /usr/sbin/iscsistart ] && copy_exec /usr/sbin/iscsistart /sbin
[ -x /usr/sbin/fwparam_ibft ] && copy_exec /usr/sbin/fwparam_ibft /sbin
[ -x /sbin/ip ] && copy_exec /sbin/ip /sbin
manual_add_modules iscsi_tcp
manual_add_modules ib_iser
</code>

=== /etc/initramfs-tools/scripts/local-top/iscsi_tcp ===
<code bash>
#!/bin/sh
 
set -e
 
PREREQ="udev"
 
prereqs()
{
        echo "$PREREQ"
}
 
case $1 in
prereqs)
        prereqs
        exit 0
        ;;
esac
 
case $ROOT in
/dev/sd*)
        # Evaluate IBFT parameters
        for i in $(fwparam_ibft -b); do export $i; done

        #Bring up the interface used to boot
        for i in $(ls /sys/class/net); do
                IFADDR=$(cat /sys/class/net/$i/address)
                if [ $IFADDR = $iSCSI_INITIATOR_HWADDR ]; then
                        echo "Using $i with MAC $IFADDR"
                        export iSCSI_INITIATOR_IF=$i
                fi
        done

        modprobe -q iscsi_tcp
        modprobe -q ib_iser

        echo "Bringing up $iSCSI_INITIATOR_IF for iSCSI..."
        ip link set $iSCSI_INITIATOR_IF up
        echo "Setting up networking on $iSCSI_INITIATOR_IF..."
        ip addr add $iSCSI_INITIATOR_IPADDR/$iSCSI_INITIATOR_MASK brd + dev $iSCSI_INITIATOR_IF

        echo "Connecting to iSCSI target $iSCSI_TARGET_NAME on $iSCSI_TARGET_IPADDR..."
        iscsistart -i $iSCSI_INITIATOR_NAME -t $iSCSI_TARGET_NAME -g 1 -a $iSCSI_TARGET_IPADDR
        ;;
esac
</code>
Trace: • stefanha • ideas • willem • debian_lenny_iscsi • qemupxe • romomatic
Navigation

Search

Toolbox

QR Code
