Differences

This shows you the differences between two versions of the page.

--- eb_imagetypes [2007/04/07 03:58]
stevem
+++ eb_imagetypes [2007/04/07 04:00] (current)
stevem
@@ Line 210: / Line 210: @@
    syslinux /dev/sda1
-  * mount the device and copy over required //networkcard.zlilo// file and corresponding //syslinux.cfg// [[eb_imagetypes#Using lilo on a floppy|just as in a diskette boot]].  There will now be three files on the flash device
+  * Mount the device and copy over required //networkcard.zlilo// file and corresponding //syslinux.cfg// [[eb_imagetypes#Using lilo on a floppy|just as in a diskette boot]].  There will now be three files on the flash device
   root@shark(/flash)# ls
@@ Line 218: / Line 218: @@
   default r8169.zli
-  * unmount the device, shutdown and reboot from the network.
+  * Unmount the device, shutdown and reboot from the network.
  ===== USB Flash EtherBoot - ZIP drive geometry =====
@@ Line 227: / Line 227: @@
   mkdiskimage -4 /dev/sda 0 64 32
-  * Install syslinux onto the key.
+  * Install SYSLINUX onto the key.
   syslinux /dev/sda4
@@ Line 233: / Line 233: @@
   * Mount /dev/sda4 and copy over required //networkcard.zlilo// file and corresponding //syslinux.cfg// [[eb_imagetypes#Using lilo on a floppy|just as in a diskette boot]]
-  * unmount the device, shutdown and reboot from the network.
+  * Unmount the device, shutdown and reboot from the network.
 More recipies can be found [[http://www.beezmo.com/FloobyDustDir/FDKnoppixUsbDir/FDKnoppixUsb.htm|here]], with another source of information [[http://www.freesoftwaremagazine.com/articles/grub_intro|here]].