✎ dnsmasq - Etherboot/gPXE Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== How to configure dnsmasq for gPXE ======

{{ nic.jpeg?237×222|A network card}}

===== Why DNSMasq =====

  * It is small and lightweight
  * Easy to setup (includes its own tftp server)
  * It may already be running on your linux-based router :-)

===== Defining the gPXE-specific options =====

Add the following settings to your ///etc/dnsmasq.conf// file:

    dhcp-boot=pxelinux.0
    enable-tftp
    tftp-root=/var/lib/tftpboot

for pxe chaining use this:

    dhcp-match=gpxe,175
    dhcp-boot=net:#gpxe,gpxe.pxe
    dhcp-boot=pxelinux.0
    
the '#' above is a 'not', not a comment

See: http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq.conf.example
for more information

===== Chain-booting gPXE into SAN-boot / installation =====

These settings will cause your existing PXE to load gPXE, and then gPXE to boot off an iSCSI target. If the target can not be booted, it is left registered so that you can [[sanboot:iscsi_install|install an operating system]] to it.

    enable-tftp
    tftp-root=/var/lib/tftpboot    # place your gpxe.pxe (either built yourself or from http://rom-o-matic.net here)
    dhcp-match=gpxe,175            # tags the request with net:gpxe if the gPXE option was supplied in DHCP request
    dhcp-option=175,8:1:1          # turn on the keep-san option to allow installation
    dhcp-boot=net:#gpxe,gpxe.pxe   # Here #gpxe means 'not gpxe': that is the tag is not set
    dhcp-option=net:gpxe,17,"iscsi:ta.rg.et.ip::::iqn.yyyy-mm.reversed-domain-name>:identifier"


===== A potential problem and a fix =====

According to this page: http://blog.nella.org/?p=335

<code>
gPXE wants to find the boot filename in the dedicated slot in the reply packet. 
dnsmasq does something clever/stupid (I’m not sure which) and puts it 
someplace else. You have to use the –dhcp-no-override option to 
dnsmasq to make gPXE see the filename.
</code>

Here is an online version of the [[http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html|man page]] for 
dnsmasq.  it contains this switch explanation:

<code>
--dhcp-no-override
Disable re-use of the DHCP servername and filename fields as extra 
option space. If it can, dnsmasq moves the boot server and filename 
information (from dhcp-boot) out of their dedicated fields into DHCP 
options. This make extra space available in the DHCP packet for 
options but can, rarely, confuse old or broken clients. This flag 
forces "simple and safe" behaviour to avoid problems in such a case.
</code>

Trace: • ideas • srp_install • romburning • zeroconf_design • winpe_memdisk • gdbstub • pxechaining • notes • gpxeonvmware • notes

Navigation

Search

Toolbox

QR Code